[PATCH v2 1/5] dt-bindings: pinctrl: qcom: Add SM6350 LPI pinctrl

Add bindings for pin controller in Low Power Audio SubSystem (LPASS).

Signed-off-by: Luca Weiss <[email protected]>
---
 .../pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml     | 124 +++++++++++++++++++++
 1 file changed, 124 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..4903b2d37d89
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 SoC LPASS LPI TLMM
+
+maintainers:
+  - Luca Weiss <[email protected]>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM6350 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm6350-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6350-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6350-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6350-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-4])$"
+
+      function:
+        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+                dmic3_data, gpio, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+                i2s2_data, i2s2_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws,
+                swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+                wsa_swr_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm6350-lpass-lpi-pinctrl";
+        reg = <0x033c0000 0x20000>,
+              <0x03550000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core",
+                      "audio";
+
+        i2s1_active: i2s1-active-state {
+            clk-pins {
+                pins = "gpio6";
+                function = "i2s1_clk";
+                drive-strength = <8>;
+                bias-disable;
+                output-high;
+            };
+
+            ws-pins {
+                pins = "gpio7";
+                function = "i2s1_ws";
+                drive-strength = <8>;
+                bias-disable;
+                output-high;
+            };
+
+            data-pins {
+                pins = "gpio8", "gpio9";
+                function = "i2s1_data";
+                drive-strength = <8>;
+                bias-disable;
+                output-high;
+            };
+        };
+    };

-- 
2.54.0