[PATCH v13 2/3] arm64: dts: qcom: sdm670: add camera mclk pins

The camera subsystem is added for the SoC common devicetree, but the
mclk pins should also be common across the SoC. Add the mclk pins for
the cameras.

Suggested-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: David Heidelberg <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Richard Acayan <[email protected]>
---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 1613c66f92b3..e13ced9479b7 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -1207,6 +1207,34 @@ tlmm: pinctrl@3400000 {
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio13";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio14";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio15";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk3_default: cam-mclk3-default-state {
+				pins = "gpio16";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci0_default: cci0-default-state {
 				pins = "gpio17", "gpio18";
 				function = "cci_i2c";
-- 
2.54.0