[PATCH v3 9/9] arm64: dts: qcom: milos: Add display (MDSS)
Luca Weiss <[email protected]>
| Newsgroups | org.kernel.vger.phone-devel,org.freedesktop.lists.dri-devel,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Add device nodes for display: MDSS, DPU, DSI and DSI PHY. DisplayPort is not added for now. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Luca Weiss <[email protected]> --- arch/arm64/boot/dts/qcom/milos.dtsi | 211 +++++++++++++++++++++++++++++++++++- 1 file changed, 209 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi index 4a64a98a434b..1a9b72d61688 100644 --- a/arch/arm64/boot/dts/qcom/milos.dtsi +++ b/arch/arm64/boot/dts/qcom/milos.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2025, Luca Weiss <[email protected]> */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,milos-camcc.h> #include <dt-bindings/clock/qcom,milos-dispcc.h> #include <dt-bindings/clock/qcom,milos-gcc.h> @@ -1928,6 +1929,212 @@ camcc: clock-controller@adb0000 { #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,milos-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,milos-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-402000000 { + opp-hz = /bits/ 64 <402000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-535000000 { + opp-hz = /bits/ 64 <535000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-630000000 { + opp-hz = /bits/ 64 <630000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,milos-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x1000>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,milos-dsi-phy-4nm"; + reg = <0x0 0x0ae95000 0x0 0x200>, + <0x0 0x0ae95200 0x0 0x300>, + <0x0 0x0ae95500 0x0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,milos-dispcc"; reg = <0x0 0x0af00000 0x0 0x20000>; @@ -1936,8 +2143,8 @@ dispcc: clock-controller@af00000 { <&sleep_clk>, <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, /* dsi0_phy_pll_out_byteclk */ - <0>, /* dsi0_phy_pll_out_dsiclk */ + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, /* dp0_phy_pll_link_clk */ <0>; /* dp0_phy_pll_vco_div_clk */ -- 2.54.0