[PATCH v2 4/4] drm/panel: Enable GPIOLIB for panels which uses functions from it
David Heidelberg via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.phone-devel,org.freedesktop.lists.dri-devel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: David Heidelberg <[email protected]> These panels used on sdm845 devices are using GPIOLIB functions, ensure it's enabled. Signed-off-by: David Heidelberg <[email protected]> --- drivers/gpu/drm/panel/Kconfig | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 9360297ee99e5..268b45d4b82f5 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -102,16 +102,17 @@ config DRM_PANEL_BOE_TV101WUM_LL2 depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to support for BOE TV101WUM-LL2 WUXGA PANEL DSI Video Mode panel config DRM_PANEL_EBBG_FT8719 tristate "EBBG FT8719 panel driver" + depends on GPIOLIB depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the EBBG FT8719 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. The panel has a resolution of 1080x2246. It provides a MIPI DSI interface to the host. @@ -339,17 +340,18 @@ config DRM_PANEL_JADARD_JD9365DA_H3 depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Jadard JD9365DA-H3 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 800RGBx1280 dots at maximum. config DRM_PANEL_JDI_LPM102A188A tristate "JDI LPM102A188A DSI panel" - depends on OF && GPIOLIB + depends on GPIOLIB + depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for JDI LPM102A188A DSI command mode panel as found in Google Pixel C devices. The panel has a 2560×1800 resolution. It provides a MIPI DSI interface to the host. @@ -454,16 +456,17 @@ config DRM_PANEL_LG_LG4573 depends on OF && SPI select VIDEOMODE_HELPERS help Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. config DRM_PANEL_LG_SW43408 tristate "LG SW43408 panel" + depends on GPIOLIB depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select DRM_DISPLAY_DSC_HELPER select DRM_DISPLAY_HELPER help Say Y here if you want to enable support for LG sw43408 panel. The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per @@ -579,26 +582,28 @@ config DRM_PANEL_NOVATEK_NT36523 depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the panels built around the Novatek NT36523 display controller, such as some Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. config DRM_PANEL_NOVATEK_NT36672A tristate "Novatek NT36672A DSI panel" + depends on GPIOLIB depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the panels built around the Novatek NT36672A display controller, such as some Tianma panels used in a few Xiaomi Poco F1 mobile phones. config DRM_PANEL_NOVATEK_NT36672E tristate "Novatek NT36672E DSI panel" + depends on GPIOLIB depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit RGB per pixel. @@ -726,17 +731,18 @@ config DRM_PANEL_RAYDIUM_RM692E5 select DRM_DISPLAY_DSC_HELPER select DRM_DISPLAY_HELPER help Say Y here if you want to enable support for Raydium RM692E5-based display panels, such as the one found in the Fairphone 5 smartphone. config DRM_PANEL_RAYDIUM_RM69380 tristate "Raydium RM69380-based DSI panel" - depends on OF && GPIOLIB + depends on GPIOLIB + depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Raydium RM69380-based display panels. This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 in combination with an EDO OLED panel. @@ -1251,16 +1257,17 @@ config DRM_PANEL_VISIONOX_R66451 select DRM_DISPLAY_DSC_HELPER select DRM_DISPLAY_HELPER help Say Y here if you want to enable support for Visionox R66451 1080x2340 AMOLED DSI panel. config DRM_PANEL_VISIONOX_RM69299 tristate "Visionox RM69299" + depends on GPIOLIB depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Visionox RM69299 DSI Video Mode panel. config DRM_PANEL_VISIONOX_RM692E5 -- 2.53.0