[PATCH v2 00/10] ARM: qcom: msm8960: enable WCNSS (Bluetooth & Wi-Fi)

Enable the WCNSS (Riva) subsystem on MSM8960-based devices to support
Bluetooth and Wi-Fi.

Add the required device tree nodes and resources, including memory
regions, clocks, interconnects, and communication interfaces used by
the WCNSS firmware and drivers.

Changes:
- Add Riva (WCNSS) nodes: firmware memory, WCN3660 iris radio,
  Bluetooth and Wi-Fi subdevices, and pinctrl states
- Add SMSM and SPS nodes for coordination with the WCNSS subsystem
- Add shared memory and hardware lock for inter-processor communication
- Add SCM node for secure channel manager interaction
- Add RPM clock controller and required QDSS clock resource
- Add bindings for SPS interrupt controller and RPM clocks

This series supersedes the earlier dt-bindings-only submission [1] and
includes the corresponding driver and DT integration changes.

This patch series depends on:
  [2] "dt-bindings: usb: ci-hdrc-usb2: allow up to 3 clocks for
  qcom,ci-hdrc"
for fixing the USB controller clock configuration on MSM8960.

Tested on:
- Sony Xperia SP
- Samsung Galaxy Express (SGH-I437) - requires additional work for
  firmware loading (separate series pending)

Known limitations (not addressed in this series):
The wcn36xx driver appears to misclassify 2.4 GHz networks as 5 GHz
during hardware scanning, preventing association with 2.4 GHz networks.
This issue has also been observed on MSM8916 and MSM8953 platforms
using WCN3620 [3][4].

[1] https://lore.kernel.org/all/20260218-msm8960-sps-rpm-bindings-v1-0-bbc11c0d4f24@smankusors.com/
[2] https://lore.kernel.org/all/[email protected]/
[3] https://github.com/msm8916-mainline/linux/commit/cc4abc694fcf2c942410136bc58a61e79bf21e83
[4] https://github.com/msm8953-mainline/linux/commit/779c9627ec0b971bf466588e64fe530cf78a414d

Signed-off-by: Antony Kurniawan Soemardi <[email protected]>
---
Changes in v2:
- Updated cover letter about the previous dt-bindings only submission
  and the dependency on the USB controller clock fix series
- Drop the apq8064 reference from the commit message for adding msm8960
  QDSS clock resource
- Add fallback compatible "qcom,rpmcc-apq8064" in the rpmcc node
- Updated qcom,rpmcc dt-bindings to allow for fallback compatible
- Put clocks, clock-names, reg, reg-names, interrupt-names, &
  smem-states entries one per line in the rpmcc, riva, and wifi nodes
- Move riva pinctrl assignments to SoC DTSI
- Renamed hwmutex to hwlock for consistency with the dt-bindings
- Link to v1: https://patch.msgid.link/[email protected]
- Note: an incomplete v1 also exists at https://lore.kernel.org/all/[email protected]/
  due to SMTP rate limit. Please ignore that thread.

---
Antony Kurniawan Soemardi (10):
      dt-bindings: clock: qcom,rpmcc: add msm8960 compatible
      dt-bindings: mfd: syscon: add qcom,msm8960-sps-sic
      mfd: qcom_rpm: add msm8960 QDSS clock resource
      clk: qcom: clk-rpm: add msm8960 compatible
      ARM: dts: qcom: msm8960: add RPM clock controller and fix USB clocks
      ARM: dts: qcom: msm8960: add SCM
      ARM: dts: qcom: msm8960: add SMEM & hwlock
      ARM: dts: qcom: msm8960: add SMSM & SPS
      ARM: dts: qcom: msm8960: add Riva
      ARM: dts: qcom: msm8960: huashan: enable Wi-Fi and Bluetooth

 .../devicetree/bindings/clock/qcom,rpmcc.yaml      |  77 ++++++----
 Documentation/devicetree/bindings/mfd/syscon.yaml  |   2 +
 .../boot/dts/qcom/qcom-msm8960-sony-huashan.dts    |  15 ++
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi           | 170 ++++++++++++++++++++-
 drivers/clk/qcom/clk-rpm.c                         |   1 +
 drivers/mfd/qcom_rpm.c                             |   1 +
 6 files changed, 234 insertions(+), 32 deletions(-)
---
base-commit: 028ef9c96e96197026887c0f092424679298aae8
change-id: 20251226-msm8960-wifi-beecd96c6646

Best regards,
--  
Antony Kurniawan Soemardi <[email protected]>