Re: [PATCH 0/2] Add gpio configuration support for Qualcomm Snapdragon platform
Neil Armstrong <[email protected]>
| Newsgroups | org.kernel.vger.phone-devel,org.u-boot-project.lists.u-boot |
|---|---|
| Organization | Linaro |
| Message-ID | <[email protected]> |
On 6/1/26 13:52, Petr Hodina via B4 Relay wrote: > This patch series adds the gpio configuration as input along with > pull-up/down/disable and drive strength for output. > > Remove the reconfiguration from the set_direction. > > This enables on mainline Linux phones to use volume-up in menu. > > Signed-off-by: Petr Hodina <[email protected]> > --- > Petr Hodina (2): > gpio: qcom_pmic_gpio: implement standard pinconf parameters > gpio: qcom_pmic_gpio: don't reset pull on direction change > > drivers/gpio/qcom_pmic_gpio.c | 41 ++++++++++++++++++++++++++++++++--------- Please switch to drivers/gpio/qcom_spmi_gpio.c instead, this driver is deprecated and should be removed once it's tested on all SoCs referenced. Thanks, Neil > 1 file changed, 32 insertions(+), 9 deletions(-) > --- > base-commit: 1f89ddd61cd8c27a3dc1fc7edbeccb55d424eb72 > change-id: 20260601-qcom-gpio-98e85ab22647 > > Best regards, > -- > Petr Hodina <[email protected]> > >