[PATCH 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Convert fb to use memory-region
David Heidelberg via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.phone-devel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: David Heidelberg <[email protected]> Instead of manually specifying reg, reuse the memory region. This fixed mismatch of the node naming (0xe1000000 X framebuffer@a000000) Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 04cb9230d29fd..4ca0e93ed63ee 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -35,19 +35,19 @@ aliases { serial1 = &uart7; }; chosen { #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer0: framebuffer@a000000 { + framebuffer { compatible = "simple-framebuffer"; - reg = <0x0 0xe1000000 0x0 (2700 * 1224 * 4)>; + memory-region = <&cont_splash_mem>; width = <1224>; height = <2700>; stride = <(1224 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; vci-supply = <&vreg_oled_vci>; dvdd-supply = <&vreg_oled_dvdd>; }; -- 2.53.0