Re: [PATCH v7 2/8] media: qcom: camss: csiphy-3ph: Use odd bits for configuring C-PHY lanes

On 6/5/2026 9:14 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <[email protected]>
> 
> So far, only D-PHY mode was supported, which uses even bits when enabling
> or masking lanes. For C-PHY configuration, the hardware instead requires
> using the odd bits.
> 
> Since there can be unrecognized configuration allow returning failure.
> 
> Acked-by: Cory Keitz <[email protected]>
> Reviewed-by: Bryan O'Donoghue <[email protected]>
> Reviewed-by: Bryan O'Donoghue <[email protected]>

There are two Reviewed-by tags from Bryan here.

Thanks,
Wenmeng