Re: [PATCH 2/2] arm64: dts: qcom: kodiak: Add camera mclk pinctrl definitions

On 6/12/26 13:55, Luca Weiss wrote:
> On different boards the cameras are connected to different pins with the
> cam_mclk function. Add the definitions so that mclk0-5 are covered.
> 
> Signed-off-by: Luca Weiss <[email protected]>
> ---
>   arch/arm64/boot/dts/qcom/kodiak.dtsi | 35 +++++++++++++++++++++++++++++++++++
>   1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> index 62daef726d32..903937947811 100644
> --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
> +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> @@ -6505,6 +6505,27 @@ qup_uart15_rx: qup-uart15-rx-state {
>   				function = "qup17";
>   			};
>   
> +			cam_mclk0_default: cam-mclk0-default-state {
> +				pins = "gpio64";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk1_default: cam-mclk1-default-state {
> +				pins = "gpio65";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk2_default: cam-mclk2-default-state {
> +				pins = "gpio66";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
>   			cam_mclk3_default: cam-mclk3-default-state {
>   				pins = "gpio67";
>   				function = "cam_mclk";
> @@ -6512,6 +6533,13 @@ cam_mclk3_default: cam-mclk3-default-state {
>   				bias-disable;
>   			};
>   
> +			cam_mclk4_default: cam-mclk4-default-state {
> +				pins = "gpio68";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
>   			cci0_default: cci0-default-state {
>   				pins = "gpio69", "gpio70";
>   				function = "cci_i2c";
> @@ -6578,6 +6606,13 @@ pcie0_clkreq_n: pcie0-clkreq-n-state {
>   				function = "pcie0_clkreqn";
>   			};
>   
> +			cam_mclk5_default: cam-mclk5-default-state {
> +				pins = "gpio93";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
>   			mi2s0_mclk: mi2s0-mclk-state {
>   				pins = "gpio96";
>   				function = "pri_mi2s";
> 

Reviewed-by: Vladimir Zapolskiy <[email protected]>

-- 
Best wishes,
Vladimir