[PATCH v3 2/4] dt-bindings: display: panel: Add documentation for lg,sw49410-lh609qh1

Document how to use lg,sw49410-lh609qh1 in a devicetree

Signed-off-by: Paul Sajna <[email protected]>
---
 .../bindings/display/panel/lg,sw49410.yaml         | 79 ++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/lg,sw49410.yaml b/Documentation/devicetree/bindings/display/panel/lg,sw49410.yaml
new file mode 100644
index 000000000000..4c4bf4d89353
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,sw49410.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw49410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LH609QH1 MIPI-DSI panel with SW49410 controller
+
+maintainers:
+  - Paul Sajna <[email protected]>
+
+description:
+  LG LH609QH1 6.1" 1440x3120 MIPI DSI panel with SW49410 controller found in LG G7 ThinQ smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: lg,sw49410
+      - const: lg,sw49410-lh609qh1
+
+  reg:
+    maxItems: 1
+
+  backlight:
+    description: Backlight device reference
+
+  reset-gpios:
+    description: Reset pin reference
+
+  vsp-supply:
+    description: Positive voltage supply
+
+  vsn-supply:
+    description: Negative voltage supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+  - vsp-supply
+  - vsn-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            reg = <0>;
+            compatible = "lg,sw49410-lh609qh1";
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+            width-mm = <65>;
+            height-mm = <140>;
+
+            vsp-supply = <&lab>;
+            vsn-supply = <&ibb>;
+
+            pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+            pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+            pinctrl-names = "default", "sleep";
+
+            port {
+              panel_in: endpoint {
+                remote-endpoint = <&mdss_dsi0_out>;
+              };
+            };
+        };
+    };

-- 
2.54.0