[PATCH v2 2/3] phy: qcom: qmp-pcie: Add pcs_lane1 offset to V5 offsets
Esteban Urrutia via B4 Relay <[email protected]> Wed, 15 Jul 2026 02:37:47 -0400
| Newsgroups | org.kernel.vger.phone-devel,org.infradead.lists.linux-phy,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Esteban Urrutia <[email protected]> Some SoCs such as SM8475 write data to registers using this offset, specifically SW_CTRL2 and MX_CTRL2. Add pcs_lane1 offset to V5 offsets to support this. Signed-off-by: Esteban Urrutia <[email protected]> --- drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index d3effad7a074..3618812e84d5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -3554,6 +3554,7 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = { .pcs_misc = 0x0600, .tx = 0x0e00, .rx = 0x1000, + .pcs_lane1 = 0x1400, .tx2 = 0x1600, .rx2 = 0x1800, }; -- 2.55.0