[PATCH 2/2] regulator: qcom-rpmh: Add support for PM8350B
Esteban Urrutia via B4 Relay <[email protected]> Thu, 23 Jul 2026 10:53:53 -0400
| Newsgroups | org.kernel.vger.phone-devel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Esteban Urrutia <[email protected]> The PM8350B has only one LDO, which gets its power from a dedicated input. Add support for it. Signed-off-by: Esteban Urrutia <[email protected]> --- drivers/regulator/qcom-rpmh-regulator.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 756a4201225e..73856e3df337 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1269,6 +1269,11 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = { {} }; +static const struct rpmh_vreg_init_data pm8350b_vreg_data[] = { + RPMH_VREG("ldo1", LDO, 1, &pmic5_nldo, "vdd-l1"), + {} +}; + static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = { RPMH_VREG("smps1", SMPS, 1, &pmic5_hfsmps515, "vdd-s1"), RPMH_VREG("smps2", SMPS, 2, &pmic5_ftsmps510, "vdd-s2"), @@ -1868,6 +1873,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm8350-rpmh-regulators", .data = pm8350_vreg_data, }, + { + .compatible = "qcom,pm8350b-rpmh-regulators", + .data = pm8350b_vreg_data, + }, { .compatible = "qcom,pm8350c-rpmh-regulators", .data = pm8350c_vreg_data, -- 2.55.0