[PATCH 1/4] media: dt-bindings: dongwoon,dw9714: Example shouldn't imply 1.8 V

From: David Heidelberg <[email protected]>

The datasheet says VDD should be between 2.3 to 4.3V, usually around
2.8V. Correct to prevent confusion and extend description.

Fixes: 2a96b40f366a ("media: dt-bindings: dongwoon,dw9714: convert to dtschema")
Signed-off-by: David Heidelberg <[email protected]>
---
 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
index 66229a3dc05d6..7f5aa098351dc 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -20,28 +20,28 @@ properties:
   reg:
     maxItems: 1
 
   powerdown-gpios:
     description:
       XSD pin for shutdown (active low)
 
   vcc-supply:
-    description: VDD power supply
+    description: VDD power supply (2.3 to 4.3V)
 
 required:
   - compatible
   - reg
 
 additionalProperties: false
 
 examples:
   - |
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         camera-lens@c {
             compatible = "dongwoon,dw9714";
             reg = <0x0c>;
-            vcc-supply = <&reg_csi_1v8>;
+            vcc-supply = <&reg_vcm_2v8>;
         };
     };

-- 
2.53.0