[PATCH 2/4] arm64: dts: rockchip: rk3399-pinephone-pro: DW9714 coil requires higher voltage
David Heidelberg via B4 Relay <[email protected]> Sat, 01 Aug 2026 02:35:21 +0200
| Newsgroups | org.kernel.vger.phone-devel,dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.infradead.lists.linux-rockchip,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-media,org.kernel.vger.stable |
|---|---|
| Message-ID | <[email protected]> |
From: David Heidelberg <[email protected]> By datasheet the VDD (in-kernel named vcc) range is between 2.3 to 4.3 V. Usually it's around 2.8 V. Here it matches the avdd2v8_dvp. Fixes: 9336eb829a18 ("arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro") Cc: [email protected] Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index d46cdfe3f7849..bde35d9b2263e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -473,17 +473,17 @@ wcam_out: endpoint { }; }; }; wcam_lens: camera-lens@c { compatible = "dongwoon,dw9714"; reg = <0x0c>; /* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */ - vcc-supply = <&vcc1v8_dvp>; + vcc-supply = <&avdd2v8_dvp>; }; ucam: camera@36 { compatible = "ovti,ov8858"; reg = <0x36>; clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */ clock-names = "xvclk"; dovdd-supply = <&vcc1v8_dvp>; -- 2.53.0