[PATCH v4 3/7] ARM: dts: qcom: msm8960: add SCM
Antony Kurniawan Soemardi via B4 Relay <[email protected]> Mon, 03 Aug 2026 02:03:47 +0700
| Newsgroups | org.kernel.vger.phone-devel,dev.linux.lists.mfd,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Antony Kurniawan Soemardi <[email protected]> Add the Secure Channel Manager firmware device node to the MSM8960 device tree. The SCM is required for secure communication between the application processor and other subsystems. Tested-by: Rudraksha Gupta <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Antony Kurniawan Soemardi <[email protected]> --- arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 6ead9fec557a..00957482dee6 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -77,6 +77,15 @@ l2: l2-cache { }; }; + firmware { + scm { + compatible = "qcom,scm-msm8960", "qcom,scm"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; + }; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0>; -- 2.34.1