[PATCH 1/2] dt-bindings: display: panel: Add bindings for Novatek NT37703

From: Esteban Urrutia <[email protected]>

Add bindings for this display driver IC which is used to drive MIPI DSI
panels.

Signed-off-by: Esteban Urrutia <[email protected]>
---
 .../bindings/display/panel/novatek,nt37703.yaml    | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt37703.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt37703.yaml
new file mode 100644
index 000000000000..e1aeed5b978e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt37703.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt37703.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT37703 display driver IC based panels
+
+maintainers:
+  - Esteban Urrutia <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - motorola,bronco-tianma-v2-nt37703
+      - const: novatek,nt37703
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply for panel
+
+  elvdd-supply:
+    description: Positive electroluminiscent (EL) power supply for panel
+
+  elvss-supply:
+    description: Negative electroluminiscent (EL) power supply for panel
+
+  vci-supply:
+    description: Analog power supply for DDIC
+
+  vdd-supply:
+    description: Digital power supply for DDIC
+
+  vddi-supply:
+    description: Digital I/O power supply for DDIC
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+allOf:
+  - $ref: panel-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "motorola,bronco-tianma-v2-nt37703", "novatek,nt37703";
+            reg = <0>;
+
+            vci-supply = <&vreg_l13c_3p0>;
+            vdd-supply = <&vreg_l1d_1p25>;
+            vddi-supply = <&vreg_l12c_1p8>;
+            reset-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...

-- 
2.55.0