[PATCH] platform/x86: asus-armoury: add support for FX517ZR
AbdElRahman Soliman <[email protected]> Wed, 29 Jul 2026 14:09:41 +0300
| Newsgroups | org.kernel.vger.platform-driver-x86,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Add DMI match and power-limit table entry for the ASUS TUF Dash F15 (2022), board FX517ZR, an Alder Lake + RTX 3070 laptop. AC and DC min/max values for ppt_pl1_spl, ppt_pl2_sppt, nv_dynamic_boost and nv_temp_target were read from the sliders in ASUS Armoury Crate's manual performance-tuning mode on Windows for this exact model, since ASUS does not publish these limits on the Web. Tested locally: values now report correctly via 'asusctl armoury list' instead of unavailable, and Dynamic Boost via nvidia-powerd measurably raises GPU power limit under load, consistent with the 80W base + 25W boost = 105W max TGP in ASUS's own spec sheet for this configuration. Assisted-by: Claude:claude-sonnet-5 Signed-off-by: AbdElRahman Soliman <[email protected]> --- drivers/platform/x86/asus-armoury.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h index bc899bec7..46c308ba8 100644 --- a/drivers/platform/x86/asus-armoury.h +++ b/drivers/platform/x86/asus-armoury.h @@ -975,6 +975,32 @@ static const struct dmi_system_id power_limits[] = { .requires_fan_curve = true, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "FX517ZR"), + }, + .driver_data = &(struct power_data) { + .ac_data = &(struct power_limits) { + .ppt_pl1_spl_min = 28, + .ppt_pl1_spl_max = 85, + .ppt_pl2_sppt_min = 28, + .ppt_pl2_sppt_max = 135, + .nv_dynamic_boost_min = 5, + .nv_dynamic_boost_max = 25, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .dc_data = &(struct power_limits) { + .ppt_pl1_spl_min = 25, + .ppt_pl1_spl_max = 45, + .ppt_pl2_sppt_min = 35, + .ppt_pl2_sppt_max = 60, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "FX607VU"), -- 2.55.0