[PATCH 4/6] platform/x86: msi-wmi-platform: Clean up devices

The current driver has multiple minor mistakes. Fix them all in one
cleanup patch.

- Device names are inconsistent/incorrect for the quirk table
- Per the Windows DLL, PL2 must always be at least 1W higher than
  PL1. Give PL1 and PL2 different minimum values.
- Copy buffer before write to ensure payload is sent instead of stale
  data

Signed-off-by: Derek J. Clark <[email protected]>
---
 drivers/platform/x86/msi-wmi-platform.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/msi-wmi-platform.c b/drivers/platform/x86/msi-wmi-platform.c
index fdc2f6f4ca7e..35cd35fc6446 100644
--- a/drivers/platform/x86/msi-wmi-platform.c
+++ b/drivers/platform/x86/msi-wmi-platform.c
@@ -124,8 +124,9 @@ struct msi_wmi_platform_quirk {
 	bool charge_threshold;	/* Charge threshold is supported */
 	bool dual_fans;		/* For devices with two hwmon fans */
 	bool restore_curves;	/* Restore factory curves on unload */
-	int pl_min;		/* Minimum PLx value */
+	int pl1_min;		/* Minimum PL1 value */
 	int pl1_max;		/* Maximum PL1 value */
+	int pl2_min;		/* Minimum PL2 value */
 	int pl2_max;		/* Maximum PL2 value */
 };
 
@@ -229,8 +230,9 @@ static struct msi_wmi_platform_quirk quirk_gen1 = {
 	.charge_threshold = true,
 	.dual_fans = true,
 	.restore_curves = true,
-	.pl_min = 8,
+	.pl1_min = 8,
 	.pl1_max = 43,
+	.pl2_min = 9,
 	.pl2_max = 45
 };
 static struct msi_wmi_platform_quirk quirk_gen2 = {
@@ -238,14 +240,15 @@ static struct msi_wmi_platform_quirk quirk_gen2 = {
 	.charge_threshold = true,
 	.dual_fans = true,
 	.restore_curves = true,
-	.pl_min = 8,
+	.pl1_min = 8,
 	.pl1_max = 30,
+	.pl2_min = 9,
 	.pl2_max = 37
 };
 
 static const struct dmi_system_id msi_quirks[] = {
 	{
-		.ident = "MSI Claw (gen 1)",
+		.ident = "MSI Claw A1M",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
 			DMI_MATCH(DMI_BOARD_NAME, "MS-1T41"),
@@ -253,7 +256,7 @@ static const struct dmi_system_id msi_quirks[] = {
 		.driver_data = &quirk_gen1,
 	},
 	{
-		.ident = "MSI Claw AI+ 7",
+		.ident = "MSI Claw 7 AI+ A2VM",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
 			DMI_MATCH(DMI_BOARD_NAME, "MS-1T42"),
@@ -261,7 +264,7 @@ static const struct dmi_system_id msi_quirks[] = {
 		.driver_data = &quirk_gen2,
 	},
 	{
-		.ident = "MSI Claw AI+ 8",
+		.ident = "MSI Claw 8 AI+ A2VM",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
 			DMI_MATCH(DMI_BOARD_NAME, "MS-1T52"),
@@ -1131,7 +1134,7 @@ static int msi_wmi_fw_attrs_init(struct msi_wmi_platform_data *data)
 
 	if (data->quirks->pl1_max) {
 		err = msi_fw_attr_init(data, MSI_ATTR_PPT_PL1_SPL,
-					&fw_attr_type_int, data->quirks->pl_min,
+					&fw_attr_type_int, data->quirks->pl1_min,
 					data->quirks->pl1_max, &data_get_value,
 					&data_set_value);
 		if (err)
@@ -1140,7 +1143,7 @@ static int msi_wmi_fw_attrs_init(struct msi_wmi_platform_data *data)
 
 	if (data->quirks->pl2_max) {
 		err = msi_fw_attr_init(data, MSI_ATTR_PPT_PL2_SPPT,
-				       &fw_attr_type_int, data->quirks->pl_min,
+				       &fw_attr_type_int, data->quirks->pl2_min,
 				       data->quirks->pl2_max, &data_get_value,
 				       &data_set_value);
 		if (err)
@@ -1259,6 +1262,7 @@ static ssize_t msi_wmi_platform_debugfs_write(struct file *fp, const char __user
 		return ret;
 
 	down_write(&data->buffer_lock);
+	memcpy(data->buffer, payload, data->length);
 	ret = msi_wmi_platform_query(data->data, data->method, data->buffer,
 				     data->length);
 	up_write(&data->buffer_lock);
@@ -1266,10 +1270,6 @@ static ssize_t msi_wmi_platform_debugfs_write(struct file *fp, const char __user
 	if (ret < 0)
 		return ret;
 
-	down_write(&data->buffer_lock);
-	memcpy(data->buffer, payload, data->length);
-	up_write(&data->buffer_lock);
-
 	return length;
 }
 
-- 
2.55.0