[PATCH 1/2] ASoC: sgtl5000: sort the register default table

Peter Ujfalusi <[email protected]>
Newsgroups org.kernel.vger.stable,org.kernel.vger.linux-sound
Message-ID <[email protected]>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch().  See commit
fd80df352ba1 ("regcache: Add support for sorting defaults arrays").

SGTL5000_CHIP_SHORT_CTRL (0x003c) is listed before
SGTL5000_CHIP_ANA_TEST2 (0x003a), which makes the former unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.

Sort the table by register address.

Fixes: 29aa37cddfb9 ("ASoC: sgtl5000: Fix the cache handling")
Cc: [email protected]
Signed-off-by: Peter Ujfalusi <[email protected]>
---
 sound/soc/codecs/sgtl5000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 59642673b4cb..35df1a8c4c8c 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -56,8 +56,8 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_CHIP_PLL_CTRL,		0x5000 },
 	{ SGTL5000_CHIP_CLK_TOP_CTRL,		0x0000 },
 	{ SGTL5000_CHIP_ANA_STATUS,		0x0000 },
-	{ SGTL5000_CHIP_SHORT_CTRL,		0x0000 },
 	{ SGTL5000_CHIP_ANA_TEST2,		0x0000 },
+	{ SGTL5000_CHIP_SHORT_CTRL,		0x0000 },
 	{ SGTL5000_DAP_CTRL,			0x0000 },
 	{ SGTL5000_DAP_PEQ,			0x0000 },
 	{ SGTL5000_DAP_BASS_ENHANCE,		0x0040 },
-- 
2.55.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.