[PATCH 6.6 083/261] qede: sync udp_tunnel ports outside qede_lock in the recovery path

Greg Kroah-Hartman <[email protected]>
Newsgroups org.kernel.vger.stable,dev.linux.lists.patches
Message-ID <[email protected]>
6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis V. Lunev <[email protected]>

[ Upstream commit 451c9075d6c53f2438d110addbeeeea6fac18567 ]

A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:

  NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
  [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
  [qede_recovery_handler:2665(ens6f0)]Starting a recovery process

The recovery path deadlocks on the driver's own mutex:

  qede_sp_task
   rtnl_lock()
   mutex_lock(&edev->qede_lock)        <- taken
   qede_recovery_handler
    qede_load
    udp_tunnel_nic_reset_ntf
     __udp_tunnel_nic_device_sync
      info->sync_table == qede_udp_tunnel_sync
       mutex_lock(&edev->qede_lock)    <- same task: deadlock

The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.

Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.

qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.

This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.

Fixes: 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <[email protected]>
CC: Andrew Lunn <[email protected]>
CC: "David S. Miller" <[email protected]>
CC: Eric Dumazet <[email protected]>
CC: Jakub Kicinski <[email protected]>
CC: Paolo Abeni <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c | 44 ++++++++++----------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index b5d744d2586f7..59a80f7193723 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -107,7 +107,7 @@ static void qede_remove(struct pci_dev *pdev);
 static void qede_shutdown(struct pci_dev *pdev);
 static void qede_link_update(void *dev, struct qed_link_output *link);
 static void qede_schedule_recovery_handler(void *dev);
-static void qede_recovery_handler(struct qede_dev *edev);
+static bool qede_recovery_handler(struct qede_dev *edev);
 static void qede_schedule_hw_err_handler(void *dev,
 					 enum qed_hw_err_type err_type);
 static void qede_get_eth_tlv_data(void *edev, void *data);
@@ -1065,21 +1065,6 @@ void __qede_unlock(struct qede_dev *edev)
 	mutex_unlock(&edev->qede_lock);
 }
 
-/* This version of the lock should be used when acquiring the RTNL lock is also
- * needed in addition to the internal qede lock.
- */
-static void qede_lock(struct qede_dev *edev)
-{
-	rtnl_lock();
-	__qede_lock(edev);
-}
-
-static void qede_unlock(struct qede_dev *edev)
-{
-	__qede_unlock(edev);
-	rtnl_unlock();
-}
-
 static void qede_periodic_task(struct work_struct *work)
 {
 	struct qede_dev *edev = container_of(work, struct qede_dev,
@@ -1116,6 +1101,8 @@ static void qede_sp_task(struct work_struct *work)
 	 */
 
 	if (test_and_clear_bit(QEDE_SP_RECOVERY, &edev->sp_flags)) {
+		bool reloaded;
+
 		cancel_delayed_work_sync(&edev->periodic_task);
 #ifdef CONFIG_QED_SRIOV
 		/* SRIOV must be disabled outside the lock to avoid a deadlock.
@@ -1124,9 +1111,17 @@ static void qede_sp_task(struct work_struct *work)
 		if (pci_num_vf(edev->pdev))
 			qede_sriov_configure(edev->pdev, 0);
 #endif
-		qede_lock(edev);
-		qede_recovery_handler(edev);
-		qede_unlock(edev);
+		rtnl_lock();
+		__qede_lock(edev);
+		reloaded = qede_recovery_handler(edev);
+		__qede_unlock(edev);
+
+		/* The udp_tunnel core synchronously calls back into
+		 * qede_udp_tunnel_sync(), which takes the qede lock.
+		 */
+		if (reloaded)
+			udp_tunnel_nic_reset_ntf(edev->ndev);
+		rtnl_unlock();
 	}
 
 	__qede_lock(edev);
@@ -2667,9 +2662,13 @@ static void qede_recovery_failed(struct qede_dev *edev)
 		edev->ops->common->set_power_state(edev->cdev, PCI_D3hot);
 }
 
-static void qede_recovery_handler(struct qede_dev *edev)
+/* Returns true if an open device was successfully reloaded and its
+ * udp_tunnel ports need to be re-synced by the caller.
+ */
+static bool qede_recovery_handler(struct qede_dev *edev)
 {
 	u32 curr_state = edev->state;
+	bool reloaded = false;
 	int rc;
 
 	DP_NOTICE(edev, "Starting a recovery process\n");
@@ -2699,17 +2698,18 @@ static void qede_recovery_handler(struct qede_dev *edev)
 			goto err;
 
 		qede_config_rx_mode(edev->ndev);
-		udp_tunnel_nic_reset_ntf(edev->ndev);
+		reloaded = true;
 	}
 
 	edev->state = curr_state;
 
 	DP_NOTICE(edev, "Recovery handling is done\n");
 
-	return;
+	return reloaded;
 
 err:
 	qede_recovery_failed(edev);
+	return false;
 }
 
 static void qede_atomic_hw_err_handler(struct qede_dev *edev)
-- 
2.53.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.