[PATCH 7.1.y 2/2] mm/slab: prevent unbounded recursion in free path with new kmalloc type
Sasha Levin <[email protected]>
| Newsgroups | org.kernel.vger.stable |
|---|---|
| Message-ID | <[email protected]> |
From: "Harry Yoo (Oracle)" <[email protected]> [ Upstream commit d9e6a7623938968e3752b67e37eaff097e559a54 ] Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab") avoided recursive allocation of obj_exts from kmalloc caches of the same size, by bumping the obj_exts array's allocation size whenever the array size equals the size of the object being allocated. However, as reported by Danielle Costantino and Shakeel Butt, even slabs from kmalloc caches of different sizes can form a cycle by allocating obj_exts arrays from each other [1]: What happened: a KMALLOC_NORMAL slab's obj_exts array (used by allocation profiling / memcg accounting) is itself kmalloc()'d from a KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array" relation can form cycles. With sizeof(struct slabobj_ext) == 16 and the host's geometry: - kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes, served from kmalloc-1k; - kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes, served from kmalloc-512. A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's obj_exts array. Discarding one frees the other's array, which empties and discards that slab, which frees the first's array, and so on: __free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() -> __free_slab() recurses along the cycle until the stack is exhausted. With memory allocation profiling, this allows unbounded recursion in the free path and led to a stack overflow on a production host in the Meta fleet [1]: BUG: TASK stack guard page was hit Oops: stack guard page RIP: 0010:kfree+0x8/0x5d0 Call Trace: __free_slab+0x66/0xc0 kfree+0x3f0/0x5d0 ... ( ~125x __free_slab <-> kfree ) ... <kernel driver freeing a resource> do_syscall_64 It is proposed [1] to resolve this issue by always serving the obj_exts array allocation from kmalloc caches (or large kmalloc) of sizes larger than the object size. However, as pointed out by Vlastimil Babka [2], this can waste an excessive amount of memory as slabs from large kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much smaller than the object size. Therefore, rather than bumping the size, let us take a different approach; disallow formation of cycles between kmalloc types when allocating obj_exts arrays. Currently, all obj_exts arrays are served from normal kmalloc caches. Cycles cannot be created if obj_exts arrays of normal kmalloc caches are served from a special kmalloc type that can never have obj_exts arrays. To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT. KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when either 1) memory allocation profiling is not permanently disabled, or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are aliased with KMALLOC_NORMAL. Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred because allocation of a barn can trigger obj_exts array allocation of normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size is not ready yet. For simplicity, perform bootstrapping of sheaves for all kmalloc caches later. Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent allocation of obj_exts arrays, and let kmalloc_slab() override the type to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains unchanged because kmalloc_flags() bypasses the kmalloc fastpath. Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when the objects are allocated from normal kmalloc caches. While this prevents unbounded recursive allocation of obj_exts, it allows KMALLOC_NO_OBJ_EXT caches to have sheaves. Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents allocation of both sheaves and obj_exts arrays, the recursion depth is bounded. obj_exts arrays for non-kmalloc-normal caches can now have a valid tag. Do not call mark_obj_codetag_empty() when freeing an obj_exts array to avoid false warnings. KMALLOC_NO_OBJ_EXT don't need this as they never allocate those arrays. Reported-by: Danielle Costantino <[email protected]> Reported-by: Shakeel Butt <[email protected]> Closes: https://lore.kernel.org/linux-mm/[email protected] [1] Fixes: 4b8736964640 ("mm/slab: add allocation accounting into slab allocation and free paths") Cc: [email protected] Link: https://lore.kernel.org/linux-mm/[email protected] [2] Signed-off-by: Harry Yoo (Oracle) <[email protected]> Reviewed-by: Suren Baghdasaryan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Vlastimil Babka (SUSE) <[email protected]> Signed-off-by: Sasha Levin <[email protected]> --- include/linux/slab.h | 6 +++ mm/slab.h | 28 +++++++++++++- mm/slab_common.c | 13 +++++++ mm/slub.c | 87 +++++++++++++++----------------------------- 4 files changed, 75 insertions(+), 59 deletions(-) diff --git a/include/linux/slab.h b/include/linux/slab.h index 1a69255bb87f2..259d5a8eac92f 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -633,6 +633,9 @@ enum kmalloc_cache_type { #endif #ifndef CONFIG_MEMCG KMALLOC_CGROUP = KMALLOC_NORMAL, +#endif +#ifndef CONFIG_SLAB_OBJ_EXT + KMALLOC_NO_OBJ_EXT = KMALLOC_NORMAL, #endif KMALLOC_RANDOM_START = KMALLOC_NORMAL, KMALLOC_RANDOM_END = KMALLOC_RANDOM_START + RANDOM_KMALLOC_CACHES_NR, @@ -646,6 +649,9 @@ enum kmalloc_cache_type { #endif #ifdef CONFIG_MEMCG KMALLOC_CGROUP, +#endif +#ifdef CONFIG_SLAB_OBJ_EXT + KMALLOC_NO_OBJ_EXT, #endif NR_KMALLOC_TYPES }; diff --git a/mm/slab.h b/mm/slab.h index bf2f87acf5e3a..50414bd2b9196 100644 --- a/mm/slab.h +++ b/mm/slab.h @@ -365,9 +365,13 @@ static inline struct kmem_cache * kmalloc_slab(size_t size, kmem_buckets *b, gfp_t flags, unsigned long caller) { unsigned int index; + enum kmalloc_cache_type type = kmalloc_type(flags, caller); + + if (flags & __GFP_NO_OBJ_EXT) + type = KMALLOC_NO_OBJ_EXT; if (!b) - b = &kmalloc_caches[kmalloc_type(flags, caller)]; + b = &kmalloc_caches[type]; if (size <= 192) index = kmalloc_size_index[size_index_elem(size)]; else @@ -402,7 +406,8 @@ static inline bool is_kmalloc_normal(struct kmem_cache *s) { if (!is_kmalloc_cache(s)) return false; - return !(s->flags & (SLAB_CACHE_DMA|SLAB_ACCOUNT|SLAB_RECLAIM_ACCOUNT)); + + return !(s->flags & (SLAB_CACHE_DMA|SLAB_ACCOUNT|SLAB_RECLAIM_ACCOUNT|SLAB_NO_OBJ_EXT)); } bool __kfree_rcu_sheaf(struct kmem_cache *s, void *obj); @@ -505,6 +510,25 @@ static inline void metadata_access_disable(void) kasan_enable_current(); } +/* + * Return true if KMALLOC_NORMAL caches may need obj_exts arrays. + * + * Memory allocation profiling requires obj_exts for all caches. + * Memcg usually doesn't need them for normal kmalloc caches, but kmalloc types + * with a priority higher than KMALLOC_CGROUP can be aliased with KMALLOC_NORMAL. + */ +static inline bool need_kmalloc_no_objext(void) +{ + if (!mem_alloc_profiling_permanently_disabled()) + return true; + + if (!mem_cgroup_kmem_disabled() && + (KMALLOC_NORMAL == KMALLOC_RECLAIM)) + return true; + + return false; +} + #ifdef CONFIG_SLAB_OBJ_EXT /* diff --git a/mm/slab_common.c b/mm/slab_common.c index 8b661fff5eedb..214374233fb8d 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -843,6 +843,12 @@ EXPORT_SYMBOL(kmalloc_size_roundup); #define KMALLOC_RANDOM_NAME(N, sz) #endif +#ifdef CONFIG_SLAB_OBJ_EXT +#define KMALLOC_NO_OBJ_EXT_NAME(sz) .name[KMALLOC_NO_OBJ_EXT] = "kmalloc-no-objext-" #sz, +#else +#define KMALLOC_NO_OBJ_EXT_NAME(sz) +#endif + #define INIT_KMALLOC_INFO(__size, __short_size) \ { \ .name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \ @@ -850,6 +856,7 @@ EXPORT_SYMBOL(kmalloc_size_roundup); KMALLOC_CGROUP_NAME(__short_size) \ KMALLOC_DMA_NAME(__short_size) \ KMALLOC_RANDOM_NAME(RANDOM_KMALLOC_CACHES_NR, __short_size) \ + KMALLOC_NO_OBJ_EXT_NAME(__short_size) \ .size = __size, \ } @@ -957,6 +964,12 @@ new_kmalloc_cache(int idx, enum kmalloc_cache_type type) return; } flags |= SLAB_ACCOUNT; + } else if (IS_ENABLED(CONFIG_SLAB_OBJ_EXT) && type == KMALLOC_NO_OBJ_EXT) { + if (!need_kmalloc_no_objext()) { + kmalloc_caches[type][idx] = kmalloc_caches[KMALLOC_NORMAL][idx]; + return; + } + flags |= SLAB_NO_OBJ_EXT | SLAB_NO_MERGE; } else if (IS_ENABLED(CONFIG_ZONE_DMA) && (type == KMALLOC_DMA)) { flags |= SLAB_CACHE_DMA; } diff --git a/mm/slub.c b/mm/slub.c index 12ace29329275..b12e40e1c3038 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2106,42 +2106,6 @@ static inline void init_slab_obj_exts(struct slab *slab) slab->obj_exts = 0; } -/* - * Calculate the allocation size for slabobj_ext array. - * - * When memory allocation profiling is enabled, the obj_exts array - * could be allocated from the same slab cache it's being allocated for. - * This would prevent the slab from ever being freed because it would - * always contain at least one allocated object (its own obj_exts array). - * - * To avoid this, increase the allocation size when we detect the array - * may come from the same cache, forcing it to use a different cache. - */ -static inline size_t obj_exts_alloc_size(struct kmem_cache *s, - struct slab *slab, gfp_t gfp) -{ - size_t sz = sizeof(struct slabobj_ext) * slab->objects; - struct kmem_cache *obj_exts_cache; - - if (sz > KMALLOC_MAX_CACHE_SIZE) - return sz; - - if (!is_kmalloc_normal(s)) - return sz; - - obj_exts_cache = kmalloc_slab(sz, NULL, gfp, 0); - /* - * We can't simply compare s with obj_exts_cache, because random kmalloc - * caches have multiple caches per size, selected by caller address. - * Since caller address may differ between kmalloc_slab() and actual - * allocation, bump size when sizes are equal. - */ - if (s->object_size == obj_exts_cache->object_size) - return obj_exts_cache->object_size + 1; - - return sz; -} - int alloc_slab_obj_exts(struct slab *slab, struct kmem_cache *s, gfp_t gfp, bool new_slab) { @@ -2150,13 +2114,17 @@ int alloc_slab_obj_exts(struct slab *slab, struct kmem_cache *s, unsigned long new_exts; unsigned long old_exts; struct slabobj_ext *vec; - size_t sz; + size_t sz = sizeof(struct slabobj_ext) * slab->objects; gfp &= ~OBJCGS_CLEAR_MASK; - /* Prevent recursive extension vector allocation */ - gfp |= __GFP_NO_OBJ_EXT; - sz = obj_exts_alloc_size(s, slab, gfp); + /* + * In most cases, obj_exts arrays are allocated from normal kmalloc. + * However, normal kmalloc caches must allocate them from + * KMALLOC_NO_OBJ_EXT caches to prevent recursion. + */ + if (is_kmalloc_normal(s)) + gfp |= __GFP_NO_OBJ_EXT; /* * Note that allow_spin may be false during early boot and its @@ -2165,10 +2133,11 @@ int alloc_slab_obj_exts(struct slab *slab, struct kmem_cache *s, * very early allocations on those. */ if (unlikely(!allow_spin)) - vec = kmalloc_nolock(sz, __GFP_ZERO | __GFP_NO_OBJ_EXT, + vec = kmalloc_nolock(sz, __GFP_ZERO | (gfp & __GFP_NO_OBJ_EXT), slab_nid(slab)); else - vec = kmalloc_node(sz, gfp | __GFP_ZERO, slab_nid(slab)); + vec = kmalloc_node(sz, gfp | __GFP_ZERO, + slab_nid(slab)); if (!vec) { /* @@ -2183,8 +2152,21 @@ int alloc_slab_obj_exts(struct slab *slab, struct kmem_cache *s, return -ENOMEM; } - VM_WARN_ON_ONCE(virt_to_slab(vec) != NULL && - virt_to_slab(vec)->slab_cache == s); + if (IS_ENABLED(CONFIG_DEBUG_VM)) { + struct kmem_cache *exts_cache; + struct slab *exts_slab; + + exts_slab = virt_to_slab(vec); + if (exts_slab) { + /* + * The vector must be allocated from either normal or + * KMALLOC_NO_OBJ_EXT kmalloc caches to avoid cycles. + */ + exts_cache = exts_slab->slab_cache; + WARN_ON_ONCE(!is_kmalloc_normal(exts_cache) && + !(exts_cache->flags & SLAB_NO_OBJ_EXT)); + } + } new_exts = (unsigned long)vec; #ifdef CONFIG_MEMCG @@ -2207,7 +2189,6 @@ int alloc_slab_obj_exts(struct slab *slab, struct kmem_cache *s, * assign slabobj_exts in parallel. In this case the existing * objcg vector should be reused. */ - mark_obj_codetag_empty(vec); if (unlikely(!allow_spin)) kfree_nolock(vec); else @@ -2243,14 +2224,6 @@ static inline void free_slab_obj_exts(struct slab *slab, bool allow_spin) return; } - /* - * obj_exts was created with __GFP_NO_OBJ_EXT flag, therefore its - * corresponding extension will be NULL. alloc_tag_sub() will throw a - * warning if slab has extensions but the extension of an object is - * NULL, therefore replace NULL with CODETAG_EMPTY to indicate that - * the extension for obj_exts is expected to be NULL. - */ - mark_obj_codetag_empty(obj_exts); if (allow_spin) kfree(obj_exts); else @@ -7904,10 +7877,10 @@ static int calculate_sizes(struct kmem_cache_args *args, struct kmem_cache *s) s->allocflags |= __GFP_RECLAIMABLE; /* - * For KMALLOC_NORMAL caches we enable sheaves later by - * bootstrap_kmalloc_sheaves() to avoid recursion + * For kmalloc caches we enable sheaves later by + * bootstrap_kmalloc_sheaves() to avoid recursion. */ - if (!is_kmalloc_normal(s)) + if (!is_kmalloc_cache(s)) s->sheaf_capacity = calculate_sheaf_capacity(s, args); /* @@ -8473,7 +8446,7 @@ static void __init bootstrap_kmalloc_sheaves(void) { enum kmalloc_cache_type type; - for (type = KMALLOC_NORMAL; type <= KMALLOC_RANDOM_END; type++) { + for (type = KMALLOC_NORMAL; type < NR_KMALLOC_TYPES; type++) { for (int idx = 0; idx < KMALLOC_SHIFT_HIGH + 1; idx++) { struct kmem_cache *s = kmalloc_caches[type][idx]; -- 2.53.0