Re: [PATCH v23 2/5] PCI: Allow per function PCI slots to fix slot reset on s390

Bjorn Helgaas <[email protected]>
Newsgroups org.kernel.vger.stable,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pci,org.kernel.vger.linux-s390
Message-ID <20260813232546.GA1281281@bhelgaas>
On Wed, Aug 05, 2026 at 09:55:15AM -0700, Farhan Ali wrote:
> On s390 systems, which use a machine level hypervisor, PCI devices are
> always accessed through a form of PCI pass-through which fundamentally
> operates on a per PCI function granularity. This is also reflected in the
> s390 PCI hotplug driver which creates hotplug slots for individual PCI
> functions. Its reset_slot() function, which is a wrapper for
> zpci_hot_reset_device(), thus also resets individual functions.

Sorry to come back to this yet again.  I understand the issue with
the wrong pci_slot being assigned for these s390 functions.

What I don't understand is why we would use slot_reset() in the first
place.  I would expect FLR instead.

The hotplug slot_reset() path is used by pci_reset_bus_function().
But given the order in pci_reset_fn_methods[], we would typically try
pcie_reset_flr() first, and we would only get to
pci_reset_bus_function() if FLR and the other resets are not
available.

Since these are actually multi-function devices, I'm surprised that
they wouldn't advertise FLR support.

> Currently, the pci_create_slot() assigns the same pci_slot object to
> multifunction devices. This approach worked fine on s390 systems that only
> exposed virtual functions as individual PCI domains to the operating
> system.  Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
> s390 supports exposing the topology of multifunction PCI devices by
> grouping them in a shared PCI domain. This creates a problem when resetting
> a function through the hotplug driver's slot_reset() interface.
> 
> When attempting to reset a function through the hotplug driver, the shared
> slot assignment causes the wrong function to be reset instead of the
> intended one. It also leaks memory as we do create a pci_slot object for
> the function, but don't correctly free it in pci_slot_release().
> 
> Add a flag for struct pci_slot to allow per function PCI slots for
> functions managed through a hypervisor, which exposes individual PCI
> functions while retaining the topology. Since we can use all 8 bits for
> slot 'number' (for ARI devices), change slot 'number' u16 to account for
> special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES.
> 
> Fixes: 44510d6fa0c0 ("s390/pci: Handling multifunctions")
> Cc: [email protected]
> Suggested-by: Niklas Schnelle <[email protected]>
> Reviewed-by: Niklas Schnelle <[email protected]>
> Signed-off-by: Farhan Ali <[email protected]>
> ---
>  drivers/pci/pci.c   |  5 +++--
>  drivers/pci/slot.c  | 29 +++++++++++++++++++++++------
>  include/linux/pci.h |  7 ++++---
>  3 files changed, 30 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 77b17b13ee61..350bae907ebf 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4897,8 +4897,9 @@ static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, bool probe)
>  
>  static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
>  {
> -	if (dev->multifunction || dev->subordinate || !dev->slot ||
> -	    dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)
> +	if (dev->subordinate || !dev->slot ||
> +	    dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
> +	    (dev->multifunction && !dev->slot->per_func_slot))
>  		return -ENOTTY;
>  
>  	return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
> diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
> index 42ff66461f74..897223f01f6a 100644
> --- a/drivers/pci/slot.c
> +++ b/drivers/pci/slot.c
> @@ -72,6 +72,23 @@ static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
>  	return bus_speed_read(slot->bus->cur_bus_speed, buf);
>  }
>  
> +static bool pci_dev_matches_slot(struct pci_dev *dev, struct pci_slot *slot)
> +{
> +	if (slot->per_func_slot)
> +		return dev->devfn == slot->number;
> +
> +	return slot->number == PCI_SLOT_ALL_DEVICES ||
> +		PCI_SLOT(dev->devfn) == slot->number;
> +}
> +
> +static bool pci_slot_enabled_per_func(void)
> +{
> +	if (IS_ENABLED(CONFIG_S390))
> +		return true;
> +
> +	return false;
> +}
> +
>  static void pci_slot_release(struct kobject *kobj)
>  {
>  	struct pci_dev *dev;
> @@ -82,8 +99,7 @@ static void pci_slot_release(struct kobject *kobj)
>  
>  	down_read(&pci_bus_sem);
>  	list_for_each_entry(dev, &slot->bus->devices, bus_list)
> -		if (slot->number == PCI_SLOT_ALL_DEVICES ||
> -		    PCI_SLOT(dev->devfn) == slot->number)
> +		if (pci_dev_matches_slot(dev, slot))
>  			dev->slot = NULL;
>  	up_read(&pci_bus_sem);
>  
> @@ -187,8 +203,7 @@ void pci_dev_assign_slot(struct pci_dev *dev)
>  
>  	mutex_lock(&pci_slot_mutex);
>  	list_for_each_entry(slot, &dev->bus->slots, list)
> -		if (slot->number == PCI_SLOT_ALL_DEVICES ||
> -		    PCI_SLOT(dev->devfn) == slot->number)
> +		if (pci_dev_matches_slot(dev, slot))
>  			dev->slot = slot;
>  	mutex_unlock(&pci_slot_mutex);
>  }
> @@ -299,6 +314,9 @@ struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
>  	slot->bus = pci_bus_get(parent);
>  	slot->number = slot_nr;
>  
> +	if (pci_slot_enabled_per_func())
> +		slot->per_func_slot = 1;
> +
>  	slot->kobj.kset = pci_slots_kset;
>  
>  	slot_name = make_slot_name(name);
> @@ -319,8 +337,7 @@ struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
>  
>  	down_read(&pci_bus_sem);
>  	list_for_each_entry(dev, &parent->devices, bus_list)
> -		if (slot_nr == PCI_SLOT_ALL_DEVICES ||
> -		    PCI_SLOT(dev->devfn) == slot_nr)
> +		if (pci_dev_matches_slot(dev, slot))
>  			dev->slot = slot;
>  	up_read(&pci_bus_sem);
>  
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index b628787e9485..43f80d6189a7 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -79,17 +79,18 @@
>   * and, if ARI Forwarding is enabled, functions may appear to be on multiple
>   * devices.
>   */
> -#define PCI_SLOT_ALL_DEVICES	0xfe
> +#define PCI_SLOT_ALL_DEVICES	0xfeff
>  
>  /* Used to identify a slot as a placeholder */
> -#define PCI_SLOT_PLACEHOLDER	0xff
> +#define PCI_SLOT_PLACEHOLDER	0xffff
>  
>  /* pci_slot represents a physical slot */
>  struct pci_slot {
>  	struct pci_bus		*bus;		/* Bus this slot is on */
>  	struct list_head	list;		/* Node in list of slots */
>  	struct hotplug_slot	*hotplug;	/* Hotplug info (move here) */
> -	unsigned char		number;		/* Device nr, or PCI_SLOT_ALL_DEVICES */
> +	u16			number;		/* Device nr, or PCI_SLOT_ALL_DEVICES */
> +	unsigned int		per_func_slot:1; /* Allow per function slot */
>  	struct kobject		kobj;
>  };
>  
> -- 
> 2.43.0
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.