[PATCH v5 1/3] dt-bindings: net: wireless: add flag marvell,ignore-regulatory-hint

WRT3200ACM and WRT32x routers always report a fixed US regulatory domain
from the mwifiex ROM, which conflicts with the platform regulatory
configuration on units sold outside the US market. For example:
- phy0 mwlwifi 5 GHz, hard-coded region 98 EU mapped to FR
- phy1 mwlwifi 2.4 GHz, hard-coded region 98 EU mapped to FR
- phy2 mwifiex 2.4 and 5 GHz, hard-coded region US

When the system boots, it detects a conflict between the user selected
region and the radios, e.g. BG FR US, and applies extreme restrictions,
preventing use of 5 GHz and DFS channels. This also affects phy0.

Add a device-tree flag, which allows affected platforms to ignore
an incorrect regulatory hint from ROM, so userspace can set the
correct platform regulatory domain.

[1] https://github.com/kaloz/mwlwifi/issues/173#issuecomment-307879699
[2] https://github.com/openwrt/openwrt/issues/9956

Cc: [email protected]
Signed-off-by: Georgi Valkov <[email protected]>
---
v5:
1. description: remove tag Tested-on
2. add #address-cells = <1>, #size-cells = <0> to fix a warning:
arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts:183.3-13:
Warning (reg_format): /soc/internal-regs/sdhci@d8000/wifi@1:reg:
property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)

3. description: add info about testing

v4:
1. Add binding documentation for flag marvell,ignore-regulatory-hint
2. Add dt for sd8897 and move the flag there, I used sample from docs
3. Use device_property_read_bool in the driver

v3:
I implemented and tested a better approach with no board specific code:
1. check for a device-tree flag in mwifiex_register_cfg80211in()
  !of_property_read_bool(of_root, "marvell,ignore-regulatory-hint")
2. add this flag to the root device tree of each affected board
Currently this affects only armada-385-linksys-rango.dts,
because Linux has no dts for venom. OpenWrt will take care of that.
This approach is more flexible and scalable, because the flag can
also be used in other drivers, e.g. mwlwifi (not part of Linux).

v2:
Replace the compatible device names, which are currently only available on
OpenWrt with board names which are available on both Linux and OpenWrt.

 .../devicetree/bindings/net/wireless/marvell,sd8787.yaml    | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
index 930b700b73d0..5f235cb9f3e5 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
@@ -59,6 +59,12 @@ properties:
     description: Calibration data for sub-band 3 in the 5GHz band.
     maxItems: 502
 
+  marvell,ignore-regulatory-hint:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Ignore an incorrect regulatory hint from ROM,
+      so userspace can set the correct regulatory domain.
+
   marvell,wakeup-pin:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-- 
2.55.0