[PATCH v6 04/17] rtc: rzn1: Handle unset alarm weekday in rzn1_rtc_read_alarm

Prabhakar <[email protected]>
Newsgroups org.kernel.vger.stable,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-renesas-soc,org.kernel.vger.linux-rtc
Message-ID <[email protected]>
From: Lad Prabhakar <[email protected]>

RZN1_RTC_ALW is a weekday bitmask where bit N represents weekday N.
When no alarm has been configured, the register has its power-on-reset
value of zero.

rzn1_rtc_read_alarm() uses fls() to convert the weekday bitmask into a
weekday number. When RZN1_RTC_ALW is zero, fls(0) returns zero and
fls(wday) - 1 evaluates to -1. This invalid weekday is then used to
calculate the alarm date and can either leave tm_wday set to -1 or
produce a fabricated alarm date.

Treat a zero RZN1_RTC_ALW value as an unset alarm weekday and return
without calculating the alarm date. Move reading RZN1_RTC_CTL1 before
this check so that alrm->enabled is updated for both configured and
unconfigured alarms.

Fixes: b5ad1bf00d2c4 ("rtc: rzn1: Add alarm support")
Cc: [email protected]
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
---
v5->v6:
- Dropped the output log from commit message.
- Added Reviewed-by and Tested-by tags from Wolfram.

v4->v5:
- New patch
---
 drivers/rtc/rtc-rzn1.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-rzn1.c b/drivers/rtc/rtc-rzn1.c
index 56284a4320ae..d4cba0d415b6 100644
--- a/drivers/rtc/rtc-rzn1.c
+++ b/drivers/rtc/rtc-rzn1.c
@@ -235,13 +235,24 @@ static int rzn1_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	if (ret)
 		return ret;
 
+	ctl1 = readl(rtc->base + RZN1_RTC_CTL1);
+	alrm->enabled = !!(ctl1 & (RZN1_RTC_CTL1_ALME | RZN1_RTC_CTL1_1SE));
+
 	min = readl(rtc->base + RZN1_RTC_ALM);
 	hour = readl(rtc->base + RZN1_RTC_ALH);
-	wday = readl(rtc->base + RZN1_RTC_ALW);
 
 	tm->tm_sec = 0;
 	tm->tm_min = bcd2bin(min);
 	tm->tm_hour = bcd2bin(hour);
+
+	/*
+	 * If wday is zero, no bit is set in RZN1_RTC_ALW. This is the
+	 * register's power-on reset value.
+	 */
+	wday = readl(rtc->base + RZN1_RTC_ALW);
+	if (!wday)
+		return 0;
+
 	delta_days = ((fls(wday) - 1) - tm->tm_wday + 7) % 7;
 	tm->tm_wday = fls(wday) - 1;
 
@@ -250,9 +261,6 @@ static int rzn1_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		rtc_time64_to_tm(alarm, tm);
 	}
 
-	ctl1 = readl(rtc->base + RZN1_RTC_CTL1);
-	alrm->enabled = !!(ctl1 & (RZN1_RTC_CTL1_ALME | RZN1_RTC_CTL1_1SE));
-
 	return 0;
 }
 
-- 
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.