[PATCH 7.2 01/82] PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems

Greg Kroah-Hartman <[email protected]>
Newsgroups org.kernel.vger.stable,dev.linux.lists.patches
Message-ID <[email protected]>
7.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Persvold <[email protected]>

commit 008cb88edb41f3c7c8e0ed763ff9f26719830984 upstream.

On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.

The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:

 Unable to handle kernel NULL pointer dereference at virtual address 00000800
 Oops [#1]
 CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
 Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
 epc : pci_generic_config_read+0x40/0xb0
  ra : pci_generic_config_read+0x2c/0xb0
 [<c038db9c>] pci_generic_config_read+0x40/0xb0
 [<c038da04>] pci_bus_read_config_dword+0x50/0xb0
 [<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
 [<c039245c>] pci_scan_single_device+0xa4/0x11c
 [<c0392570>] pci_scan_slot+0x9c/0x23c
 [<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
 [<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
 [<c0393e54>] pci_host_probe+0x20/0xc8
 [<c03bc6f4>] pci_host_common_probe+0x144/0x1e4

Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.

Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <[email protected]>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Cc: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/pci/controller/pci-host-generic.c |   11 +----------
 drivers/pci/ecam.c                        |   13 +++++++++++++
 include/linux/pci-ecam.h                  |    3 +++
 3 files changed, 17 insertions(+), 10 deletions(-)

--- a/drivers/pci/controller/pci-host-generic.c
+++ b/drivers/pci/controller/pci-host-generic.c
@@ -16,15 +16,6 @@
 
 #include "pci-host-common.h"
 
-static const struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
-	.bus_shift	= 16,
-	.pci_ops	= {
-		.map_bus	= pci_ecam_map_bus,
-		.read		= pci_generic_config_read,
-		.write		= pci_generic_config_write,
-	}
-};
-
 static bool pci_dw_valid_device(struct pci_bus *bus, unsigned int devfn)
 {
 	struct pci_config_window *cfg = bus->sysdata;
@@ -60,7 +51,7 @@ static const struct pci_ecam_ops pci_dw_
 
 static const struct of_device_id gen_pci_of_match[] = {
 	{ .compatible = "pci-host-cam-generic",
-	  .data = &gen_pci_cfg_cam_bus_ops },
+	  .data = &pci_generic_cam_ops },
 
 	{ .compatible = "pci-host-ecam-generic",
 	  .data = &pci_generic_ecam_ops },
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -208,6 +208,19 @@ const struct pci_ecam_ops pci_generic_ec
 };
 EXPORT_SYMBOL_GPL(pci_generic_ecam_ops);
 
+/* CAM ops */
+const struct pci_ecam_ops pci_generic_cam_ops = {
+	.bus_shift	= 16,
+	.pci_ops	= {
+		.add_bus	= pci_ecam_add_bus,
+		.remove_bus	= pci_ecam_remove_bus,
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read,
+		.write		= pci_generic_config_write,
+	}
+};
+EXPORT_SYMBOL_GPL(pci_generic_cam_ops);
+
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 /* ECAM ops for 32-bit access only (non-compliant) */
 const struct pci_ecam_ops pci_32b_ops = {
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -81,6 +81,9 @@ void __iomem *pci_ecam_map_bus(struct pc
 /* default ECAM ops */
 extern const struct pci_ecam_ops pci_generic_ecam_ops;
 
+/* default CAM ops */
+extern const struct pci_ecam_ops pci_generic_cam_ops;
+
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern const struct pci_ecam_ops pci_32b_ops;	/* 32-bit accesses only */
 extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.