Re: Getting help in writing tty driver

Greg KH <[email protected]>
Newsgroups org.kernelnewbies.kernelnewbies
Message-ID <2023070747-unable-punk-c8a6@gregkh>
On Fri, Jul 07, 2023 at 04:37:53PM +0530, Ayush Singh wrote:
> Hello everyone, I am working on a Google Summer of Code 2023 project [1]
> under BeagleBoard.or. In this project, I have to write a Linux driver that
> exposes `dev/ttyMCU0` (or something else) which can be accessed as a Serial
> tty by MCUmgr [2]. This then sends the data and gets the response from the
> CC1352 processor in BeagelPlay [3], which runs Zephyr over HDLC UART (the
> data for this tty port has a particular HDLC address).
> 
> However, all the resources I could find seem to use deprecated or old APIs
> (like `alloc_tty_driver` instead of `tty_alloc_driver`). After some trial
> and error, I was able to transfer the data written to `ttyMCU0` to CC1352
> using `write` in `tty_operations`. However, I am stumped on how to send
> data to tty from the driver so that the userspace application can read it
> (like using `cat`). Supposedly it should be done using
> `tty_insert_flip_char` but the signature for this function in the tutorials
> and the one present at `tty_flip.h` is quite different and does not seem to
> work for me. Also, there seems to be something about the Echo flag but not
> sure what all that is.
> 
> Finally, I am not sure I understand the relationship between tty port, tty
> device, and tty driver either so it would be great if someone can guide me
> to resources related to tty. I think a simple tty echo driver should allow
> me to get the hang of what I am supposed to do.

Try looking at the tty driver example in the book, "Linux Device
Drivers, third edition".  It's out of date, but the ideas a much the
same in places for tty drivers.  And then look at any of the hundreds of
in-kernel tty drivers for examples of what to do.  You might want to
look at the "smaller" ones as you don't want to get bogged down with the
uart-specific stuff.

good luck!

greg k-h

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.