Re: Debugging i2c : i2cdetect cant detect a device on i2c line

[also Cc: devicetree and ARM folks]

On Thu, Sep 07, 2023 at 08:21:44AM +0530, Raul Piper wrote:
> Hello ,
> I am trying to detect an i2c device A on i2c1 line on  one of the Arm
> Cortex A7 platform but not able to see any device on a given address (
> 0x3d) .
> 
> Is there any parameters of i2c which i can change like rise/fall time
> , timeout etc in a device tree or kernel source and re test it?
> I have tried changing the i2c speed from 100KHz to 400 KHz  but no success.
> I have even tried removing the 1.5K pull ups on the i2c lines but no result.
> 
> So I wanted to know on what factors i2cdetect may not probe the device
> or show it on the hex dump.
> What parameters of i2c driver i can tinker and where? Is Platform dts
> is the only file i can modify and test with?
> Kernel is 5.51 .

Do you mean v5.15.y stable series?

> There are other 2-3 devices on the same lines which responds to
> i2cdetect with correct address but not this device (0x3D) .
> Its i2c address is also different from the current devices.
> 

Specifically, what device do you have this issue with?

Confused...

-- 
An old man doll... just what I always wanted! - Clara

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQSSYQ6Cy7oyFNCHrUH2uYlJVVFOowUCZPnR3AAKCRD2uYlJVVFO
oyWCAP9+/SOZwrNMjfRhCDMh3l0obDG00/bTTq/q77PhjjA7rgD+NsH4fEEZCONi
2HKCHPJtDXAGeViGmvQbTqhp/EFcsAw=
=irVf
-----END PGP SIGNATURE-----