[PULL 43/83] tests/qtest: add PCA9555 register access tests

From: Emmanuel Blot <[email protected]>

Introduce a qtest for the PCA9555 16-bit I/O port expander.

This first set covers the power-on reset defaults and the read/write
behaviour of the OUTPUT, CONFIG and POLARITY register pairs.

Signed-off-by: Emmanuel Blot <[email protected]>
Reviewed-by: Glenn Miles <[email protected]>
Link: https://lore.kernel.org/qemu-devel/[email protected]
Signed-off-by: Cédric Le Goater <[email protected]>
---
 tests/qtest/pca9555-test.c | 44 ++++++++++++++++++++++++++++++++++++++
 tests/qtest/meson.build    |  1 +
 2 files changed, 45 insertions(+)
 create mode 100644 tests/qtest/pca9555-test.c

diff --git a/tests/qtest/pca9555-test.c b/tests/qtest/pca9555-test.c
new file mode 100644
index 000000000000..5945c3441e92
--- /dev/null
+++ b/tests/qtest/pca9555-test.c
@@ -0,0 +1,44 @@
+/*
+ * QTest testcase for the PCA9555 16-bit I/O port expander
+ *
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/gpio/pca9552_regs.h"
+#include "libqos/i2c.h"
+#include "libqos/qgraph.h"
+
+#define PCA9555_TEST_ADDR 0x20
+
+/* Verify power-on reset defaults match the PCA9555 datasheet. */
+static void test_reset_defaults(void *obj, void *data, QGuestAllocator *alloc)
+{
+    QI2CDevice *dev = (QI2CDevice *)obj;
+
+    g_assert_cmphex(i2c_get8(dev, PCA9535_INPUT0), ==, 0xFF);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_INPUT1), ==, 0xFF);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_OUTPUT0), ==, 0xFF);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_OUTPUT1), ==, 0xFF);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_POLARITY0), ==, 0x00);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_POLARITY1), ==, 0x00);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_CONFIG0), ==, 0xFF);
+    g_assert_cmphex(i2c_get8(dev, PCA9535_CONFIG1), ==, 0xFF);
+}
+
+static void pca9555_register_nodes(void)
+{
+    QOSGraphEdgeOptions opts = {
+        .extra_device_opts = "address=0x20"
+    };
+    add_qi2c_address(&opts, &(QI2CAddress) { PCA9555_TEST_ADDR });
+
+    qos_node_create_driver("pca9555", i2c_device_create);
+    qos_node_consumes("pca9555", "i2c-bus", &opts);
+
+    qos_add_test("reset-defaults", "pca9555", test_reset_defaults, NULL);
+}
+
+libqos_init(pca9555_register_nodes);
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 5e1fc597e6d1..e92130bd04dd 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -319,6 +319,7 @@ qos_test_ss.add(
   'tulip-test.c',
   'nvme-test.c',
   'pca9552-test.c',
+  'pca9555-test.c',
   'pci-test.c',
   'pcnet-test.c',
   'rs5c372-test.c',
-- 
2.55.0