[PATCH 00/10] hw/arm: Enable U-Boot boot on MCIMX6UL-EVK
Bin Meng <[email protected]>
| Newsgroups | org.nongnu.qemu-arm,org.nongnu.qemu-devel |
|---|---|
| Message-ID | <[email protected]> |
The mcimx6ul-evk machine can boot Linux directly, but it cannot run the U-Boot proper produced by Buildroot far enough to load a kernel from its SD card. Early U-Boot boot test accesses currently abort or observe placeholder values, and the i.MX uSDHC model exposes several issues. This series lets an unmodified Buildroot 2026.05 U-Boot 2024.07 image run on mcimx6ul-evk, load zImage and imx6ul-14x14-evk.dtb from USDHC2, start Linux, mount the SD card root file system, and reach the Buildroot login prompt. It also documents and tests the existing direct Linux boot path. Patches 1 through 4 provide the minimum early-firmware-visible state. Patches 5 through 8 address i.MX uSDHC behavior needed by U-Boot. The last two patches document both boot paths and add functional tests for U-Boot and direct Linux boot. Bin Meng (10): hw/arm: fsl-imx6ul: Add SCU compatibility window hw/misc: imx6ul_ccm: Update PMU_MISC0 reset value hw/arm: fsl-imx6ul: Map early firmware register placeholders hw/arm: fsl-imx6ul: Add a minimal MMDC geometry model hw/sd: sdhci: Use a QEMU-local no-busy IRQ quirk bit hw/sd: sdhci: Honor i.MX uSDHC vendor clock gates hw/sd: sdhci: Preserve uSDHC status enables for U-Boot hw/sd: sdhci: Skip SDMA boundary stops for i.MX uSDHC docs/system/arm: Document MCIMX6UL-EVK Buildroot boot tests/functional/arm: Add MCIMX6UL-EVK boot tests MAINTAINERS | 1 + docs/system/arm/mcimx6ul-evk.rst | 67 +++++++++++++++++ hw/arm/fsl-imx6ul.c | 87 +++++++++++++++++++++- hw/arm/mcimx6ul-evk.c | 2 + hw/misc/imx6ul_ccm.c | 2 +- hw/sd/sdhci.c | 89 +++++++++++++++++++---- include/hw/arm/fsl-imx6ul.h | 2 + include/hw/sd/sdhci.h | 15 +++- tests/functional/arm/meson.build | 2 + tests/functional/arm/test_mcimx6ul_evk.py | 70 ++++++++++++++++++ 10 files changed, 315 insertions(+), 22 deletions(-) create mode 100644 tests/functional/arm/test_mcimx6ul_evk.py --- base-commit: e8d693e12af9cbb89d724baadfcc08559669e279 branch: imx6ul-evk -- 2.53.0