[PATCH v2 3/3] migration/rdma: Retry control sends on full queue

"Yanfei Xu" <[email protected]>
Newsgroups org.nongnu.qemu-devel
Message-ID <[email protected]>
RAM writes and control messages share the send queue. If outstanding
writes fill it, RDMA writes drain a completion and retry, but control
sends fail the migration.

Move send posting and queue-full handling into a common helper. On
ENOMEM, drain one outstanding RDMA write and retry the failed request
once. If no write is outstanding, or the retry still fails, propagate
the error.

Signed-off-by: Yanfei Xu <[email protected]>
---
 migration/rdma.c       | 78 +++++++++++++++++++++++++++---------------
 migration/trace-events |  2 +-
 2 files changed, 51 insertions(+), 29 deletions(-)

diff --git a/migration/rdma.c b/migration/rdma.c
index 6e8436ccc1..ee6da4f137 100644
--- a/migration/rdma.c
+++ b/migration/rdma.c
@@ -1530,6 +1530,52 @@ err_block_for_wrid:
     return -1;
 }
 
+/*
+ * Post a send work request, draining an outstanding RDMA write if the send
+ * queue is full.
+ */
+static int qemu_rdma_post_send(RDMAContext *rdma,
+                               struct ibv_send_wr *send_wr,
+                               Error **errp)
+{
+    struct ibv_send_wr *bad_wr;
+    uint64_t wr_id = send_wr->wr_id & RDMA_WRID_TYPE_MASK;
+    const char *wr_desc;
+    int ret;
+
+    switch (wr_id) {
+    case RDMA_WRID_RDMA_WRITE:
+        wr_desc = "RDMA write";
+        break;
+    case RDMA_WRID_SEND_CONTROL:
+        wr_desc = "control send";
+        break;
+    default:
+        wr_desc = "send work request";
+        break;
+    }
+
+    ret = ibv_post_send(rdma->qp, send_wr, &bad_wr);
+    if (ret == ENOMEM && rdma->nb_sent) {
+        trace_qemu_rdma_post_send_queue_full(send_wr->wr_id, rdma->nb_sent);
+        ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
+        if (ret < 0) {
+            error_setg(errp, "rdma migration: failed to make room for %s",
+                       wr_desc);
+            return -1;
+        }
+        ret = ibv_post_send(rdma->qp, send_wr, &bad_wr);
+    }
+
+    if (ret > 0) {
+        error_setg_errno(errp, ret, "rdma migration: post %s failed",
+                         wr_desc);
+        return -1;
+    }
+
+    return 0;
+}
+
 /*
  * Post a SEND message work request for the control channel
  * containing some data and block until the post completes.
@@ -1540,7 +1586,6 @@ static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf,
 {
     int ret;
     RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL];
-    struct ibv_send_wr *bad_wr;
     struct ibv_sge sge = {
                            .addr = (uintptr_t)(wr->control),
                            .length = head->len + sizeof(RDMAControlHeader),
@@ -1572,11 +1617,8 @@ static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf,
         memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len);
     }
 
-
-    ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
-    if (ret > 0) {
-        error_setg(errp, "Failed to use post IB SEND for control");
+    ret = qemu_rdma_post_send(rdma, &send_wr, errp);
+    if (ret < 0) {
         return -1;
     }
 
@@ -1836,7 +1878,6 @@ static int qemu_rdma_write_one(RDMAContext *rdma,
 {
     struct ibv_sge sge;
     struct ibv_send_wr send_wr = { 0 };
-    struct ibv_send_wr *bad_wr;
     int reg_result_idx, ret, count = 0;
     uint64_t chunk, chunks;
     uint64_t chunk_size = migrate_rdma_chunk_size();
@@ -1850,7 +1891,6 @@ static int qemu_rdma_write_one(RDMAContext *rdma,
                                .repeat = 1,
                              };
 
-retry:
     sge.addr = (uintptr_t)(block->local_host_addr +
                             (current_addr - block->offset));
     sge.length = length;
@@ -2020,26 +2060,8 @@ retry:
     trace_qemu_rdma_write_one_post(chunk, sge.addr, send_wr.wr.rdma.remote_addr,
                                    sge.length);
 
-    /*
-     * ibv_post_send() does not return negative error numbers,
-     * per the specification they are positive - no idea why.
-     */
-    ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
-    if (ret == ENOMEM) {
-        trace_qemu_rdma_write_one_queue_full();
-        ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
-        if (ret < 0) {
-            error_setg(errp, "rdma migration: failed to make "
-                         "room in full send queue!");
-            return -1;
-        }
-
-        goto retry;
-
-    } else if (ret > 0) {
-        error_setg_errno(errp, ret,
-                         "rdma migration: post rdma write failed");
+    ret = qemu_rdma_post_send(rdma, &send_wr, errp);
+    if (ret < 0) {
         return -1;
     }
 
diff --git a/migration/trace-events b/migration/trace-events
index af0e784535..bc0c167a1a 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -251,7 +251,7 @@ qemu_rdma_unregister_waiting_complete(uint64_t chunk) "Unregister for chunk: %"
 qemu_rdma_write_flush(int sent) "sent total: %d"
 qemu_rdma_write_one_block(int count, int block, uint64_t chunk, uint64_t current, uint64_t len, int nb_sent, int nb_chunks) "(%d) Not clobbering: block: %d chunk %" PRIu64 " current %" PRIu64 " len %" PRIu64 " %d %d"
 qemu_rdma_write_one_post(uint64_t chunk, long addr, long remote, uint32_t len) "Posting chunk: %" PRIu64 ", addr: 0x%lx remote: 0x%lx, bytes %" PRIu32
-qemu_rdma_write_one_queue_full(void) ""
+qemu_rdma_post_send_queue_full(uint64_t wr_id, int sent) "send queue full, wr_id=%" PRIu64 ", outstanding writes=%d"
 qemu_rdma_write_one_recvregres(int mykey, int theirkey, uint64_t chunk) "Received registration result: my key: 0x%x their key 0x%x, chunk %" PRIu64
 qemu_rdma_write_one_sendreg(uint64_t chunk, int len, int index, int64_t offset) "Sending registration request chunk %" PRIu64 " for %d bytes, index: %d, offset: %" PRId64
 qemu_rdma_write_one_top(uint64_t chunks, uint64_t size) "Writing %" PRIu64 " chunks, (%" PRIu64 " MB)"
-- 
2.20.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.