[PATCH iwl-net 07/12] ice: E825: perform a soft reset when starting the PHY timer

To ensure that the E825 PHY timer begins in a clean state, initiate a PHY
soft reset prior to programming the PHY. This ensures that we clear any
outstanding Tx timestamp memory, and ensures that the PHY internal state
has been completely reset.

Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Maciek Machnikowski <[email protected]>
---
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index b7d217ac31f3..10e973876608 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -2119,9 +2119,11 @@ int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset)
  * @hw: pointer to the HW struct
  * @port: the PHY port to start
  *
- * Start the clock of a PHY port. This must be done as part of the flow to
- * re-calibrate Tx and Rx timestamping offsets whenever the clock time is
- * initialized or when link speed changes.
+ * Perform a PHY soft reset and then start the clock for the PHY port.
+ *
+ * This must be done as part of the flow to re-calibrate Tx and Rx
+ * timestamping offsets whenever the clock time is initialized or when link
+ * speed changes.
  *
  * Return:
  * * %0     - success
@@ -2137,6 +2139,10 @@ int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port)
 
 	tmr_idx = ice_get_ptp_src_clock_index(hw);
 
+	err = ice_ptp_phy_soft_reset_eth56g(hw, port);
+	if (err)
+		return err;
+
 	err = ice_stop_phy_timer_eth56g(hw, port, false);
 	if (err)
 		return err;

-- 
2.55.0.814.gc42f45431d0f