Re: [PATCH v2 0/2] Add Meta Rainiera6 BMC support

Andrew Jeffery <[email protected]> Wed, 27 May 2026 12:00:52 +0930

Newsgroups	org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-renesas-soc
Message-ID	<a0a62d6bcc1d1253a38fa166f4b121caf0463345.camel@codeconstruct.com.au>

On Tue, 2026-05-19 at 10:38 +0800, Neil Cheng wrote:
> Add initial device tree support for the Meta Rainiera6 platform.
> 
> Changes in v2:
> 
> - reorder adc0/adc1 properties
> - add Acked-by from Conor Dooley
> 
> This series adds:
> - Meta Rainiera6 compatible entry
> - Rainiera6 BMC DTS
> 
> The DTS has been validated with:
> - make dtbs
> - make dt_binding_check
> - make CHECK_DTBS=y
> 
> Neil Cheng (2):
>   dt-bindings: arm: aspeed: Add Meta Rainiera6 board
>   ARM: dts: aspeed: rainiera6: Add Meta Rainiera6 BMC
> 
>  .../bindings/arm/aspeed/aspeed.yaml           |    1 +
>  arch/arm/boot/dts/aspeed/Makefile             |    1 +
>  .../aspeed/aspeed-bmc-facebook-rainiera6.dts  | 1012 +++++++++++++++++
>  3 files changed, 1014 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts

Applied to aspeed/arm/dt in the BMC tree.

Thanks,

Andrew