Re: [PATCH 2/2] ARM: dts: aspeed: sanmiguel: Fix the CPU_CHIPTHROT linename
Andrew Jeffery <[email protected]>
| Newsgroups | org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <a25ff66bee5a2047296eb239c10a7ccafc6d0b30.camel@codeconstruct.com.au> |
Hi Potin,
On Sat, 2026-05-23 at 10:28 +0800, Potin Lai wrote:
> Fix the GPIO linenames for CPU_CHIPTHROT signals.
>
> The signals were incorrectly marked as output ("-O") while they are
> actually input signals ("-I").
>
> - B0_M0_CPU_CHIPTHROT_L-O -> B0_M0_CPU_CHIPTHROT_L-I
> - B1_M0_CPU_CHIPTHROT_L-O -> B1_M0_CPU_CHIPTHROT_L-I
I dropped this list when applying the patch because it's evident from
the diff.
Andrew
>
> Signed-off-by: Potin Lai <[email protected]>
> ---
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
> index 61dbef45f8b0..d7ed497d7227 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
> @@ -224,7 +224,7 @@ hpm0_ioexp_20: gpio@20 {
> "B0_M0_LEAK_DETECT_ALERT_L-I",
> "B0_M0_RUN_POWER_EN-O",
> "B0_M0_RUN_POWER_PG-I",
> - "B0_M0_CPU_CHIPTHROT_L-O",
> + "B0_M0_CPU_CHIPTHROT_L-I",
> "B0_M0_SHDN_REQ_L-O",
> "B0_M0_CPU_SHDN_OK_L-I",
> "B0_M0_CPLD_READY-I",
> @@ -398,7 +398,7 @@ hpm1_ioexp_20: gpio@20 {
> "B1_M0_LEAK_DETECT_ALERT_L-I",
> "B1_M0_RUN_POWER_EN-O",
> "B1_M0_RUN_POWER_PG-I",
> - "B1_M0_CPU_CHIPTHROT_L-O",
> + "B1_M0_CPU_CHIPTHROT_L-I",
> "B1_M0_SHDN_REQ_L-O",
> "B1_M0_CPU_SHDN_OK_L-I",
> "B1_M0_CPLD_READY-I",