[PATCH v3 0/9] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
Colin Huang via B4 Relay <[email protected]>
| Newsgroups | org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com> |
This series refactors the Anacapa BMC devicetree layout to better support development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform entrypoint. Signed-off-by: Colin Huang <[email protected]> --- Changes in v3: - Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone. - Add the DVT devicetree, inheriting from the EVT2 devicetree. - Enable MCTP and FRU support for the NIC. - Align PDB fan GPIO numbering. - Add an EEPROM device node for the NFC adaptor board. - Add an additional EEPROM device node for the SCM. - Add shunt resistor values for HSC monitors - Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com Changes in v2: - Fix dtbs_check fail. Validated by following command: make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb - Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com --- Andy Chung (1): ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC Carl Lee (1): ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board Colin Huang (5): dt-bindings: arm: aspeed: add Anacapa EVT1 EVT2 DVT board ARM: dts: aspeed: anacapa: add EVT1 devicetree and point wrapper to it ARM: dts: aspeed: anacapa: add EVT2 devicetree inheriting EVT1 ARM: dts: aspeed: anacapa: add DVT devicetree inheriting EVT2 ARM: dts: aspeed: anacapa: add additional EEPROM node for SCM Peter Shen (1): ARM: dts: aspeed: anacapa: evt2: add shunt resistor values for HSC monitors Rex Fu (1): ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering .../devicetree/bindings/arm/aspeed/aspeed.yaml | 3 + .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 178 +++ .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts | 1179 ++++++++++++++++++++ .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts | 228 ++++ .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts | 1077 +----------------- 5 files changed, 1589 insertions(+), 1076 deletions(-) --- base-commit: 7ca1caf017d34396397b19fb4de9ecef256f4acc change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0 Best regards, -- Colin Huang <[email protected]>