[PATCH v3 1/3] dt-bindings: phy: aspeed: Document AST2700 USB3.2 PHY

Document AST2700 USB3.2 PHY. This IP is connected between
USB3 controller and PHY module.

Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Ryan Chen <[email protected]>
---
 .../bindings/phy/aspeed,ast2700-usb3-phy.yaml      | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml
new file mode 100644
index 000000000000..b83037aa0438
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/aspeed,ast2700-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 USB 3.2 PHY
+
+maintainers:
+  - Ryan Chen <[email protected]>
+
+properties:
+  compatible:
+    const: aspeed,ast2700-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed,ast2700-scu.h>
+    #include <dt-bindings/reset/aspeed,ast2700-scu.h>
+
+    usb-phy@12010000 {
+        compatible = "aspeed,ast2700-usb3-phy";
+        reg = <0x12010000 0xc0>;
+        clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>;
+        resets = <&syscon0 SCU0_RESET_PORTA_PHY3>;
+        #phy-cells = <0>;
+    };

-- 
2.34.1