[PATCH v2] ARM: dts: aspeed: Correct indentation

Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).

Changes in v2:
1. Fix also arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
---
 .../aspeed-bmc-inventec-transformers.dts      | 432 +++++++++---------
 .../boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts |   2 +-
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi       |   2 +-
 3 files changed, 218 insertions(+), 218 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index c713cb7a6187..45ee0f2cc2bb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -9,320 +9,320 @@
 #include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
-       model = "TRANSFORMERS BMC";
-       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+	model = "TRANSFORMERS BMC";
+	compatible = "inventec,transformer-bmc", "aspeed,ast2600";
 
-       aliases {
-               serial4 = &uart5;
-       };
+	aliases {
+		serial4 = &uart5;
+	};
 
-       chosen {
-               stdout-path = &uart5;
-               bootargs = "console=ttyS4,115200n8";
-       };
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
 
-       memory@80000000 {
-               device_type = "memory";
-               reg = <0x80000000 0x80000000>;
-       };
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
 
-       leds {
-               compatible = "gpio-leds";
+	leds {
+		compatible = "gpio-leds";
 
-               // UID led
-               uid {
-                       label = "UID_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
-               };
+		// UID led
+		uid {
+			label = "UID_LED";
+			gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		};
 
-               // Heart beat led
-               heartbeat {
-                       label = "HB_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-               };
-       };
+		// Heart beat led
+		heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &mdio0 {
-       status = "okay";
+	status = "okay";
 
-       ethphy0: ethernet-phy@0 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <1>;
-       };
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
 
 &mac3 {
-       status = "okay";
-       phy-mode = "rgmii";
-       phy-handle = <&ethphy0>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_rgmii4_default>;
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
 };
 
 &fmc {
-       status = "okay";
+	status = "okay";
 
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout.dtsi"
-       };
+	};
 
-       flash@1 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc2";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-       };
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
 };
 
 &spi1 {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_spi1_default>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
 
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bios";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <1>;
-               spi-rx-bus-width = <1>;
-       };
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <33000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
 };
 
 &wdt1 {
-       status = "okay";
+	status = "okay";
 };
 
 &uart1 {
-       status = "okay";
+	status = "okay";
 };
 
 &uart5 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c0 {
-       status = "okay";
+	status = "okay";
 
-       //Set bmc' slave address;
-       bmc_slave@10 {
-               compatible = "ipmb-dev";
-               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-               i2c-protocol;
-       };
+	//Set bmc' slave address;
+	bmc_slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &i2c2 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c3 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
-       eeprom@50 {
-               compatible = "atmel,24c512";
-               reg = <0x50>;
-               pagesize = <128>;
-       };
+	// FRU AT24C512C-SSHM-T
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
 };
 
 &i2c5 {
-       status = "okay";
+	status = "okay";
 };
 
 &i2c6 {
-       status = "okay";
+	status = "okay";
 
-       tmp75@49 {
-               compatible = "ti,tmp75";
-               reg = <0x49>;
-       };
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
 
-       tmp75@4f {
-               compatible = "ti,tmp75";
-               reg = <0x4f>;
-       };
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
 
-       tmp468@48 {
-               compatible = "ti,tmp468";
-               reg = <0x48>;
-       };
+	tmp468@48 {
+		compatible = "ti,tmp468";
+		reg = <0x48>;
+	};
 };
 
 &i2c7 {
-       status = "okay";
-       adm1278@40 {
-               compatible = "adi,adm1278";
-               reg = <0x40>;
-       };
+	status = "okay";
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
 };
 
 
 &i2c8 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
+	// FRU AT24C512C-SSHM-T
+	status = "okay";
 
-       eeprom@51 {
-               compatible = "atmel,24c512";
-               reg = <0x51>;
-               pagesize = <128>;
-       };
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
 
-       eeprom@53 {
-               compatible = "atmel,24c512";
-               reg = <0x53>;
-               pagesize = <128>;
-       };
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+		pagesize = <128>;
+	};
 };
 
 &i2c9 {
-       // M.2
-       status = "okay";
+	// M.2
+	status = "okay";
 };
 
 &i2c10 {
-       // I2C EXPANDER
-       status = "okay";
+	// I2C EXPANDER
+	status = "okay";
 
-       i2c-mux@71 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x71>;
-       };
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+	};
 
-       i2c-mux@73 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x73>;
-       };
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+	};
 };
 
 &i2c11 {
-       // I2C EXPANDER
-       status = "okay";
+	// I2C EXPANDER
+	status = "okay";
 
-       i2c-mux@70 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x70>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
 
-               pcie_eeprom_riser1: i2c@0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0>;
+		pcie_eeprom_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
 
-               pcie_eeprom_riser2: i2c@1 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <1>;
+		pcie_eeprom_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
 
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
 
-               pcie_eeprom_riser3: i2c@2 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <2>;
+		pcie_eeprom_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
 
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-       };
+			eeprom@55 {
+				compatible = "atmel,24c512";
+				reg = <0x55>;
+				pagesize = <128>;
+			};
+		};
+	};
 };
 
 &i2c12 {
-       status = "okay";
+	status = "okay";
 
-       psu0:psu0@58 {
-               compatible = "pmbus";
-               reg = <0x58>;
-       };
+	psu0:psu0@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
 };
 
 &gpio0 {
-       status = "okay";
-       gpio-line-names =
-       /*A0-A7*/   "","","","","","","","",
-       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
-       /*C0-C7*/   "","","","","","","","",
-       /*D0-D7*/   "","","","","","","","",
-       /*E0-E7*/   "","","","","","","","",
-       /*F0-F7*/   "","","","","power-chassis-control","","","",
-       /*G0-G7*/   "","","jtag-mux","","","","","",
-       /*H0-H7*/   "","","","","reset-button","power-button","","",
-       /*I0-I7*/   "","","","","","","","",
-       /*J0-J7*/   "","","","","","","","",
-       /*K0-K7*/   "","","","","","","","",
-       /*L0-L7*/   "","","","","","","","",
-       /*M0-M7*/   "","","","","","","","",
-       /*N0-N7*/   "","","","","","","","",
-       /*O0-O7*/   "","","","","","","","",
-       /*P0-P7*/   "","","","tck-mux","","","","",
-       /*Q0-Q7*/   "","","","","","","","",
-       /*R0-R7*/   "","","","","","","","",
-       /*S0-S7*/   "","","","","","","","",
-       /*T0-T7*/   "","","","","","","","",
-       /*U0-U7*/   "","nmi-button","","","","","","",
-       /*V0-V7*/   "","","","","power-config-full-load","","","",
-       /*W0-W7*/   "","","","","","","","",
-       /*X0-X7*/   "","","","","","","","",
-       /*Y0-Y7*/   "","","","","","","","",
-       /*Z0-Z7*/   "","","","","","","","",
-       /*AA0-AA7*/ "","","","","","","","",
-       /*AB0-AB7*/ "","","","","","","","",
-       /*AC0-AC7*/ "","","","","","","","";
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","power-chassis-control","","","",
+	/*G0-G7*/   "","","jtag-mux","","","","","",
+	/*H0-H7*/   "","","","","reset-button","power-button","","",
+	/*I0-I7*/   "","","","","","","","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","","","","","","",
+	/*O0-O7*/   "","","","","","","","",
+	/*P0-P7*/   "","","","tck-mux","","","","",
+	/*Q0-Q7*/   "","","","","","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","","","","","",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","nmi-button","","","","","","",
+	/*V0-V7*/   "","","","","power-config-full-load","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
 };
 
 &lpc_snoop {
-       status = "okay";
-       snoop-ports = <0x80>;
+	status = "okay";
+	snoop-ports = <0x80>;
 };
 
 &emmc_controller {
-       status = "okay";
+	status = "okay";
 };
 
 &emmc {
-       status = "okay";
-       non-removable;
-       max-frequency = <52000000>;
-       bus-width = <8>;
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
 };
 
 &vhub {
-       status = "okay";
-       aspeed,vhub-downstream-ports = <7>;
-       aspeed,vhub-generic-endpoints = <21>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb2ad_default>;
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
 };
 
 &rtc {
-       status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index 8a7fb55ab489..5a3e8a3941d4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -82,7 +82,7 @@ &fmc {
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
-        label = "bmc";
+		label = "bmc";
 #include "openbmc-flash-layout.dtsi"
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 56bb3b0444f7..edf4b74f5aba 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -517,7 +517,7 @@ timer: timer@1e782000 {
 				clocks = <&syscon ASPEED_CLK_APB1>;
 				clock-names = "PCLK";
 				status = "disabled";
-                        };
+			};
 
 			uart1: serial@1e783000 {
 				compatible = "ns16550a";
-- 
2.53.0