Re: [PATCH] ARM: dts: aspeed-g6: add pcie-lpc and pcie-kcs4

> Add pcie_lpc node and pcie_kcs4 child to the ast2600 g6 common dtsi.
> 
> The ASPEED AST2600 has a PCIe to LPC controller. It includes a KCS
> interface on channel 4. This is a fully KCS-compatible interface
> that is exposed over PCIe.
> 
> This can be used by the host for IPMI when the PCIe BMC Device is
> activated.
> 
> While the datasheet provides interrupt numbers for KCS channels 1, 2,
> 3 and 4 over PCI, not all 4 are described in the "PCIe to LPC Controller"
> section. Since only the KCS channel 4 is described, only this channel is
> added.
> 
> Ordered next to existing lpc node for address ordering.
> Use existing "aspeed,ast2600-lpc-v2" compatible string.
> The pcie_kcs4 uses existing "aspeed,ast2600-kcs-bmc" compatible as it's a
> standard KCS interface.
> 
> Signed-off-by: Grégoire Layet <[email protected]>
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> index 56bb3b0444f7..ac351f01048f 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> @@ -658,6 +658,21 @@ ibt: ibt@140 {
>  				};
>  			};
>  
> +			pcie_lpc: pcie-lpc@1e789800 {

lpc@1e789000 already maps 0x1e789000-0x1e78a000 and 0x1e789914 falls inside it,
so you're describing a second `ast2600-lpc-v2` node which is unnecessary.

Suggestion: Merge pcie_kcs4 into lpc@1e789000 and use 914 as offset. That way
you don't accidentally cause an overlap for the devices if you describe more in
the future.

	Tan

-- 
Tan Siewert <[email protected]>