[PATCH v4 11/12] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
Colin Huang via B4 Relay <[email protected]>
| Newsgroups | org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <20260805-anacapa-devlop-phase-devicetree-v4-11-5d67e0efa6c5@gmail.com> |
From: Rex Fu <[email protected]> Remove the board location suffixes from the leakage present GPIO line names. The channel number is enough to identify each leakage present signal. Signed-off-by: Rex Fu <[email protected]> --- .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 28 +++++++++++----------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts index f09dd1abe77d..f710046f79bc 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts @@ -111,32 +111,32 @@ &sgpiom0 { "", "", /* B0-B7 line 16-31 */ - "Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL", - "Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL", - "Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL", - "Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N", - "Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L", - "Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L", - "Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330", - "Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331", + "Channel0_leakage", "FM_CPU_FPGA_JTAG_MUX_SEL", + "Channel1_leakage", "FM_SCM_JTAG_MUX_SEL", + "Channel2_leakage", "FM_BRIDGE_JTAG_MUX_SEL", + "Channel5_leakage_present", "FM_CPU0_NMI_SYNC_FLOOD_N", + "Channel4_leakage", "BMC_AINIC0_WP_R2_L", + "Channel5_leakage", "BMC_AINIC1_WP_R2_L", + "Channel6_leakage", "CPLD_BUF_R_AGPIO330", + "Channel7_leakage", "CPLD_BUF_R_AGPIO331", /* C0-C7 line 32-47 */ "RSVD_RMC_GPIO3", "RTM_MUX_L", "LEAK_DETECT_RMC_N", "RTM_MUX_R", "HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N", - "Channel6_leakage_present_CPU_DIMM", "whdt_sel", + "Channel6_leakage_present", "whdt_sel", "R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N", "R_EAM1_NIC_CBL_PRSNT_L", "", "L_EAM0_NIC_CBL_PRSNT_L", "", "L_EAM1_NIC_CBL_PRSNT_L", "", /* D0-D7 line 48-63 */ - "Channel0_leakage_present_EAM3", "", - "Channel1_leakage_present_EAM0", "", - "Channel2_leakage_present_Manifold1", "", - "Channel4_leakage_present_Manifold2", "", + "Channel0_leakage_present", "", + "Channel1_leakage_present", "", + "Channel2_leakage_present", "", + "Channel4_leakage_present", "", "AMC_BRD_PRSNT_CPLD_L", "", - "Channel7_leakage_present_EAM2", "", + "Channel7_leakage_present", "", "", "", "", "", -- 2.34.1