[PATCH v11 5/8] powerpc64/bpf: fix compare instruction emitted for tailcall

Saket Kumar Bhaskar <[email protected]>
Newsgroups org.ozlabs.lists.linuxppc-dev,org.kernel.vger.bpf,org.kernel.vger.linux-kselftest,org.kernel.vger.stable
Message-ID <aa9bf28598b952da8ce8ac5fa78105dda028ece4.1786099877.git.skb99@linux.ibm.com>
From: Abhishek Dubey <[email protected]>

The tail_call_info field can contain either a scalar counter
value or a 64-bit pointer to the counter, using a 32-bit
compare (cmplwi) only checks the lower 32 bits, which can lead
to incorrect comparisions when location of counter is near 4GB
boundary. Use instruction cmpldi/cmplwi for accurate comparision
in corresponding cases.

Reported-by: [email protected]
Closes: https://lore.kernel.org/bpf/[email protected]/
Fixes: 2ed2d8f6fb38 ("powerpc64/bpf: Support tailcalls with subprogs")
Signed-off-by: Abhishek Dubey <[email protected]>
Signed-off-by: Saket Kumar Bhaskar <[email protected]>
Tested-by: Yeswanth Krishna Tellakula <[email protected]>
Acked-by: Hari Bathini <[email protected]>
---
 arch/powerpc/net/bpf_jit.h        | 6 ++++++
 arch/powerpc/net/bpf_jit_comp.c   | 2 +-
 arch/powerpc/net/bpf_jit_comp64.c | 8 ++++----
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 6632de9871dd..af510da12d8e 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -188,6 +188,12 @@ struct codegen_context {
 
 #define bpf_to_ppc(r)	(ctx->b2p[r])
 
+#ifdef CONFIG_PPC64
+#define PPC_RAW_CMPLLI(a, i)    PPC_RAW_CMPLDI(a, i)
+#else
+#define PPC_RAW_CMPLLI(a, i)    PPC_RAW_CMPLWI(a, i)
+#endif
+
 #ifdef CONFIG_PPC32
 #define BPF_FIXUP_LEN	3 /* Three instructions => 12 bytes */
 #else
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index bdae835e4b71..757b36bfbac3 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -768,7 +768,7 @@ static void bpf_trampoline_setup_tail_call_info(u32 *image, struct codegen_conte
 		 * Setting the tail_call_info in trampoline's frame
 		 * depending on if previous frame had value or reference.
 		 */
-		EMIT(PPC_RAW_CMPLWI(_R3, MAX_TAIL_CALL_CNT));
+		EMIT(PPC_RAW_CMPLLI(_R3, MAX_TAIL_CALL_CNT));
 		PPC_BCC_CONST_SHORT(COND_GT, 8);
 		EMIT(PPC_RAW_ADDI(_R3, _R4, -BPF_PPC_TAILCALL));
 
diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 951eb10ca1f6..e80312171aa7 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -276,7 +276,7 @@ void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx)
 		 */
 		EMIT(PPC_RAW_LD(bpf_to_ppc(TMP_REG_2), _R1, 0));
 		EMIT(PPC_RAW_LD(bpf_to_ppc(TMP_REG_1), bpf_to_ppc(TMP_REG_2), -(BPF_PPC_TAILCALL)));
-		EMIT(PPC_RAW_CMPLWI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
+		EMIT(PPC_RAW_CMPLDI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
 		PPC_BCC_CONST_SHORT(COND_GT, 8);
 		EMIT(PPC_RAW_ADDI(bpf_to_ppc(TMP_REG_1), bpf_to_ppc(TMP_REG_2),
 								-(BPF_PPC_TAILCALL)));
@@ -662,7 +662,7 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o
 	PPC_BCC_SHORT(COND_GE, out);
 
 	EMIT(PPC_RAW_LD(bpf_to_ppc(TMP_REG_1), _R1, bpf_jit_stack_tailcallinfo_offset(ctx)));
-	EMIT(PPC_RAW_CMPLWI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
+	EMIT(PPC_RAW_CMPLDI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
 	PPC_BCC_CONST_SHORT(COND_LE, 8);
 
 	/* dereference TMP_REG_1 */
@@ -672,7 +672,7 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o
 	 * if (tail_call_info == MAX_TAIL_CALL_CNT)
 	 *   goto out;
 	 */
-	EMIT(PPC_RAW_CMPLWI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
+	EMIT(PPC_RAW_CMPLDI(bpf_to_ppc(TMP_REG_1), MAX_TAIL_CALL_CNT));
 	PPC_BCC_SHORT(COND_EQ, out);
 
 	/*
@@ -707,7 +707,7 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o
 	 * tail_call_info.
 	 */
 	EMIT(PPC_RAW_LD(bpf_to_ppc(TMP_REG_2), _R1, bpf_jit_stack_tailcallinfo_offset(ctx)));
-	EMIT(PPC_RAW_CMPLWI(bpf_to_ppc(TMP_REG_2), MAX_TAIL_CALL_CNT));
+	EMIT(PPC_RAW_CMPLDI(bpf_to_ppc(TMP_REG_2), MAX_TAIL_CALL_CNT));
 	PPC_BCC_CONST_SHORT(COND_GT, 8);
 
 	/* First get address of tail_call_info */
-- 
2.54.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.