Re: [PATCH] PCI/AER: Fix ratelimit and log level of Advisory Non-Fatal Errors
Bjorn Helgaas <[email protected]>
| Newsgroups | org.ozlabs.lists.linuxppc-dev,org.kernel.vger.linux-pci |
|---|---|
| Message-ID | <20260818223320.GA754605@bhelgaas> |
On Sat, Aug 15, 2026 at 03:47:10PM +0200, Lukas Wunner wrote:
> When Advisory Non-Fatal Errors are reported, the Uncorrectable Error bits
> should be reported using the same ratelimit counter and log level as the
> accompanying Correctable Error.
>
> This is done correctly when they are handled natively in aer_print_error()
> but it is not done correctly when they are handled in Firmware First mode
> in pci_print_aer().
>
> Fix it.
>
> Fixes: 21963e6e4e04 ("PCI/AER: Support Advisory Non-Fatal Errors")
> Signed-off-by: Lukas Wunner <[email protected]>
> ---
> The offending commit is the top-most one on pci/aer (queued for v7.3-rc1).
> This fix could either be folded into or applied on top of it.
Folded in, thanks!
> drivers/pci/pcie/aer.c | 27 +++++++++++++++++++++------
> 1 file changed, 21 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 2a380bb..dd2aa5d 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1028,13 +1028,15 @@ int cper_severity_to_aer(int cper_severity)
> EXPORT_SYMBOL_GPL(cper_severity_to_aer);
> #endif
>
> -void pci_print_aer(struct pci_dev *dev, int aer_severity,
> - struct aer_capability_regs *aer)
> +static void __pci_print_aer(struct pci_dev *dev, int aer_severity,
> + struct aer_capability_regs *aer,
> + bool ratelimit_print, const char *level)
> {
> const char *bus_type, *sev;
> int tlp_header_valid = 0;
> u32 status, mask;
> struct aer_err_info info = {
> + .level = level,
> .severity = aer_severity,
> .first_error = PCI_ERR_CAP_FEP(aer->cap_control),
> };
> @@ -1043,12 +1045,10 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
> status = aer->cor_status;
> mask = aer->cor_mask;
> sev = "cor";
> - info.level = KERN_WARNING;
> } else {
> status = aer->uncor_status;
> mask = aer->uncor_mask;
> sev = "uncor";
> - info.level = KERN_ERR;
> tlp_header_valid = tlp_header_logged(status & ~mask,
> aer->cap_control);
> }
> @@ -1067,7 +1067,7 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
> * For Advisory Non-Fatal Errors, record statistics and tracing
> * even if ratelimited
> */
> - if (!aer_ratelimit(dev, info.severity))
> + if (!ratelimit_print)
> goto anfe;
>
> aer_printk(info.level, dev,
> @@ -1094,10 +1094,25 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
> if (anfe_status) {
> aer->uncor_status = anfe_status;
> aer->uncor_mask = 0;
> - pci_print_aer(dev, AER_NONFATAL, aer);
> + __pci_print_aer(dev, AER_NONFATAL, aer,
> + ratelimit_print, level);
> }
> }
> }
> +
> +void pci_print_aer(struct pci_dev *dev, int aer_severity,
> + struct aer_capability_regs *aer)
> +{
> + /*
> + * Precalculate ratelimit counter and log level so that Advisory
> + * Non-Fatal Errors are treated like the accompanying Correctable Error
> + */
> + bool ratelimit_print = aer_ratelimit(dev, aer_severity);
> + const char *level = aer_severity == AER_CORRECTABLE ? KERN_WARNING
> + : KERN_ERR;
> +
> + __pci_print_aer(dev, aer_severity, aer, ratelimit_print, level);
> +}
> EXPORT_SYMBOL_GPL(pci_print_aer);
>
> /**
>
> base-commit: 21963e6e4e0425b12d3128eea5a5104a3bc909c4
> --
> 2.53.0
>