[PATCH v3 09/17] spi: sifive: Use helper function devm_clk_get_enabled()

Pei Xiao <[email protected]>
Newsgroups org.ozlabs.lists.openbmc,dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.infradead.lists.linux-mediatek,org.infradead.lists.linux-riscv,org.infradead.lists.linux-rockchip,org.kernel.vger.linux-kernel,org.kernel.vger.linux-spi
Message-ID <e0d249f53fc99a84092f29859ace9a1f22aab573.1773733017.git.xiaopei01@kylinos.cn>
devm_clk_get() and clk_prepare_enable() can now be replaced by
devm_clk_get_enabled() when driver enables the clocks. Moreover, it is no
longer necessary to unprepare and disable the clocks explicitly.
Simplify code.

Signed-off-by: Pei Xiao <[email protected]>
---
 drivers/spi/spi-sifive.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 6c7aba8befa0..54adbc057af6 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -312,7 +312,8 @@ static int sifive_spi_probe(struct platform_device *pdev)
 		goto put_host;
 	}
 
-	spi->clk = devm_clk_get(&pdev->dev, NULL);
+	/* Spin up the bus clock before hitting registers */
+	spi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(spi->clk)) {
 		dev_err(&pdev->dev, "Unable to find bus clock\n");
 		ret = PTR_ERR(spi->clk);
@@ -342,13 +343,6 @@ static int sifive_spi_probe(struct platform_device *pdev)
 		goto put_host;
 	}
 
-	/* Spin up the bus clock before hitting registers */
-	ret = clk_prepare_enable(spi->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable bus clock\n");
-		goto put_host;
-	}
-
 	/* probe the number of CS lines */
 	spi->cs_inactive = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF);
 	sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, 0xffffffffU);
@@ -357,14 +351,14 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	if (!cs_bits) {
 		dev_err(&pdev->dev, "Could not auto probe CS lines\n");
 		ret = -EINVAL;
-		goto disable_clk;
+		goto put_host;
 	}
 
 	num_cs = ilog2(cs_bits) + 1;
 	if (num_cs > SIFIVE_SPI_MAX_CS) {
 		dev_err(&pdev->dev, "Invalid number of spi targets\n");
 		ret = -EINVAL;
-		goto disable_clk;
+		goto put_host;
 	}
 
 	/* Define our host */
@@ -392,7 +386,7 @@ static int sifive_spi_probe(struct platform_device *pdev)
 			       dev_name(&pdev->dev), spi);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to bind to interrupt\n");
-		goto disable_clk;
+		goto put_host;
 	}
 
 	dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n",
@@ -401,13 +395,11 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	ret = devm_spi_register_controller(&pdev->dev, host);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "spi_register_host failed\n");
-		goto disable_clk;
+		goto put_host;
 	}
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(spi->clk);
 put_host:
 	spi_controller_put(host);
 
@@ -421,7 +413,6 @@ static void sifive_spi_remove(struct platform_device *pdev)
 
 	/* Disable all the interrupts just in case */
 	sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
-	clk_disable_unprepare(spi->clk);
 }
 
 static int sifive_spi_suspend(struct device *dev)
-- 
2.25.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.