[PATCH linux dev-6.18 2/2] hwmon: (pmbus) add driver for MPS MP9945

Add support for mp9945 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a single phase digital step down converter.

Signed-off-by: Cosmo Chou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
---
 Documentation/hwmon/index.rst  |   1 +
 Documentation/hwmon/mp9945.rst | 117 ++++++++++++++++
 MAINTAINERS                    |   7 +
 drivers/hwmon/pmbus/Kconfig    |   9 ++
 drivers/hwmon/pmbus/Makefile   |   1 +
 drivers/hwmon/pmbus/mp9945.c   | 243 +++++++++++++++++++++++++++++++++
 6 files changed, 378 insertions(+)
 create mode 100644 Documentation/hwmon/mp9945.rst
 create mode 100644 drivers/hwmon/pmbus/mp9945.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 2be07966fed6..549017d3689d 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -185,6 +185,7 @@ Hardware Monitoring Kernel Drivers
    mp5926
    mp5990
    mp9941
+   mp9945
    mpq8785
    nct6683
    nct6775
diff --git a/Documentation/hwmon/mp9945.rst b/Documentation/hwmon/mp9945.rst
new file mode 100644
index 000000000000..f406f96efcf9
--- /dev/null
+++ b/Documentation/hwmon/mp9945.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp9945
+=====================
+
+Supported chips:
+
+  * MPS mp9945
+
+    Prefix: 'mp9945'
+
+Author:
+
+	Cosmo Chou <[email protected]>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP9945 Digital Single-phase Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+**in1_lcrit**
+
+**in1_lcrit_alarm**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_crit**
+
+**in2_crit_alarm**
+
+**in2_lcrit**
+
+**in2_lcrit_alarm**
+
+**in2_min**
+
+**in2_min_alarm**
+
+The driver provides the following attributes for input current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr2_input**
+
+**curr2_label**
+
+**curr2_crit**
+
+**curr2_crit_alarm**
+
+**curr2_max**
+
+**curr2_max_alarm**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+The driver provides the following attributes for output power:
+
+**power2_input**
+
+**power2_label**
+
+**power2_max**
+
+**power2_max_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_max**
+
+**temp1_max_alarm**
diff --git a/MAINTAINERS b/MAINTAINERS
index 10b1f6f61afc..ecfe0799256d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17529,6 +17529,13 @@ S:	Maintained
 F:	Documentation/hwmon/mp9941.rst
 F:	drivers/hwmon/pmbus/mp9941.c
 
+MPS MP9945 DRIVER
+M:	Cosmo Chou <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/hwmon/mp9945.rst
+F:	drivers/hwmon/pmbus/mp9945.c
+
 MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <[email protected]>
 L:	[email protected]
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 6860673bcecf..cae994fb21ab 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -480,6 +480,15 @@ config SENSORS_MP9941
 	  This driver can also be built as a module. If so, the module will
 	  be called mp9941.
 
+config SENSORS_MP9945
+	tristate "MPS MP9945"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP9945.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp9945.
+
 config SENSORS_MPQ7932_REGULATOR
 	bool "Regulator support for MPQ7932"
 	depends on SENSORS_MPQ7932 && REGULATOR
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 57f23fb0ab86..bd37eddf16a7 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_MP5920)	+= mp5920.o
 obj-$(CONFIG_SENSORS_MP5926)	+= mp5926.o
 obj-$(CONFIG_SENSORS_MP5990)	+= mp5990.o
 obj-$(CONFIG_SENSORS_MP9941)	+= mp9941.o
+obj-$(CONFIG_SENSORS_MP9945)	+= mp9945.o
 obj-$(CONFIG_SENSORS_MPQ7932)	+= mpq7932.o
 obj-$(CONFIG_SENSORS_MPQ8785)	+= mpq8785.o
 obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
diff --git a/drivers/hwmon/pmbus/mp9945.c b/drivers/hwmon/pmbus/mp9945.c
new file mode 100644
index 000000000000..34822e0de812
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp9945.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Single-phase Digital VR Controllers(MP9945)
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+#define MFR_VR_MULTI_CONFIG_R1	0x08
+#define MFR_SVID_CFG_R1		0xBD
+
+/* VOUT_MODE register values */
+#define VOUT_MODE_LINEAR16	0x17
+#define VOUT_MODE_VID		0x21
+#define VOUT_MODE_DIRECT	0x40
+
+#define MP9945_PAGE_NUM		1
+
+#define MP9945_RAIL1_FUNC	(PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \
+				PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | \
+				PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+				PMBUS_HAVE_TEMP | \
+				PMBUS_HAVE_STATUS_VOUT | \
+				PMBUS_HAVE_STATUS_IOUT | \
+				PMBUS_HAVE_STATUS_TEMP | \
+				PMBUS_HAVE_STATUS_INPUT)
+
+enum mp9945_vout_mode {
+	MP9945_VOUT_MODE_VID,
+	MP9945_VOUT_MODE_DIRECT,
+	MP9945_VOUT_MODE_LINEAR16,
+};
+
+struct mp9945_data {
+	struct pmbus_driver_info info;
+	enum mp9945_vout_mode vout_mode;
+	int vid_resolution;
+	int vid_offset;
+};
+
+#define to_mp9945_data(x) container_of(x, struct mp9945_data, info)
+
+static int mp9945_read_vout(struct i2c_client *client, struct mp9945_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, PMBUS_READ_VOUT);
+	if (ret < 0)
+		return ret;
+
+	ret &= GENMASK(11, 0);
+
+	switch (data->vout_mode) {
+	case MP9945_VOUT_MODE_VID:
+		if (ret > 0)
+			ret = (ret + data->vid_offset) * data->vid_resolution;
+		break;
+	case MP9945_VOUT_MODE_DIRECT:
+		break;
+	case MP9945_VOUT_MODE_LINEAR16:
+		/* LSB: 1000 * 2^-9 (mV) */
+		ret = DIV_ROUND_CLOSEST(ret * 125, 64);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return ret;
+}
+
+static int mp9945_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * Override VOUT_MODE to DIRECT as the driver handles custom
+		 * VOUT format conversions internally.
+		 */
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		return -ENODATA;
+	}
+}
+
+static int mp9945_read_word_data(struct i2c_client *client, int page, int phase,
+				 int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp9945_data *data = to_mp9945_data(info);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case PMBUS_READ_VOUT:
+		ret = mp9945_read_vout(client, data);
+		break;
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = i2c_smbus_read_word_data(client, reg);
+		if (ret < 0)
+			return ret;
+
+		/* LSB: 1.95 (mV) */
+		ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * 39, 20);
+		break;
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+		ret = i2c_smbus_read_word_data(client, reg);
+		if (ret < 0)
+			return ret;
+
+		ret &= GENMASK(9, 0);
+		if (ret > 0)
+			ret = (ret + data->vid_offset) * data->vid_resolution;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int mp9945_identify(struct i2c_client *client,
+			   struct pmbus_driver_info *info)
+{
+	struct mp9945_data *data = to_mp9945_data(info);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case VOUT_MODE_LINEAR16:
+		data->vout_mode = MP9945_VOUT_MODE_LINEAR16;
+		break;
+	case VOUT_MODE_VID:
+		data->vout_mode = MP9945_VOUT_MODE_VID;
+		break;
+	case VOUT_MODE_DIRECT:
+		data->vout_mode = MP9945_VOUT_MODE_DIRECT;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 3);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_word_data(client, MFR_VR_MULTI_CONFIG_R1);
+	if (ret < 0)
+		return ret;
+
+	data->vid_resolution = (FIELD_GET(BIT(2), ret)) ? 5 : 10;
+
+	ret = i2c_smbus_read_word_data(client, MFR_SVID_CFG_R1);
+	if (ret < 0)
+		return ret;
+
+	data->vid_offset = (FIELD_GET(BIT(15), ret)) ? 19 : 49;
+
+	return i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+}
+
+static struct pmbus_driver_info mp9945_info = {
+	.pages = MP9945_PAGE_NUM,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.func[0] = MP9945_RAIL1_FUNC,
+	.read_word_data = mp9945_read_word_data,
+	.read_byte_data = mp9945_read_byte_data,
+	.identify = mp9945_identify,
+};
+
+static int mp9945_probe(struct i2c_client *client)
+{
+	struct mp9945_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(&data->info, &mp9945_info, sizeof(mp9945_info));
+
+	/*
+	 * Set page 0 before probe. The core reads paged registers which are
+	 * only on page 0 for this device.
+	 */
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+static const struct i2c_device_id mp9945_id[] = {
+	{"mp9945"},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, mp9945_id);
+
+static const struct of_device_id __maybe_unused mp9945_of_match[] = {
+	{.compatible = "mps,mp9945"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp9945_of_match);
+
+static struct i2c_driver mp9945_driver = {
+	.driver = {
+		.name = "mp9945",
+		.of_match_table = of_match_ptr(mp9945_of_match),
+	},
+	.probe = mp9945_probe,
+	.id_table = mp9945_id,
+};
+
+module_i2c_driver(mp9945_driver);
+
+MODULE_AUTHOR("Cosmo Chou <[email protected]>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP9945");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");
-- 
2.43.0