Re: [PATCH v27 3/4] i2c: ast2600: Add controller driver for AST2600 new register set

Hi Ryan,

kernel test robot noticed the following build errors:

[auto build test ERROR on 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f]

url:    https://github.com/intel-lab-lkp/linux/commits/Ryan-Chen/dt-bindings-i2c-Split-AST2600-binding-into-a-new-YAML/20260325-112805
base:   6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
patch link:    https://lore.kernel.org/r/20260324-upstream_i2c-v27-3-f19b511c8c28%40aspeedtech.com
patch subject: [PATCH v27 3/4] i2c: ast2600: Add controller driver for AST2600 new register set
config: sparc-randconfig-r073-20260325 (https://download.01.org/0day-ci/archive/20260325/[email protected]/config)
compiler: sparc-linux-gcc (GCC) 8.5.0
smatch: v0.5.0-9004-gb810ac53
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260325/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

   drivers/i2c/busses/i2c-ast2600.c: In function 'ast2600_i2c_probe':
>> drivers/i2c/busses/i2c-ast2600.c:955:15: error: 'struct ast2600_i2c_bus' has no member named 'dma_abailable'; did you mean 'dma_available'?
     if (i2c_bus->dma_abailable)
                  ^~~~~~~~~~~~~
                  dma_available


vim +955 drivers/i2c/busses/i2c-ast2600.c

   916	
   917	static int ast2600_i2c_probe(struct platform_device *pdev)
   918	{
   919		struct device *dev = &pdev->dev;
   920		struct ast2600_i2c_bus *i2c_bus;
   921		struct reset_control *rst;
   922		struct resource *res;
   923		u32 global_ctrl;
   924		int ret;
   925	
   926		if (!device_property_present(dev, "aspeed,global-regs"))
   927			return -ENODEV;
   928	
   929		i2c_bus = devm_kzalloc(dev, sizeof(*i2c_bus), GFP_KERNEL);
   930		if (!i2c_bus)
   931			return -ENOMEM;
   932	
   933		i2c_bus->reg_base = devm_platform_ioremap_resource(pdev, 0);
   934		if (IS_ERR(i2c_bus->reg_base))
   935			return PTR_ERR(i2c_bus->reg_base);
   936	
   937		rst = devm_reset_control_get_shared_deasserted(dev, NULL);
   938		if (IS_ERR(rst))
   939			return dev_err_probe(dev, PTR_ERR(rst), "Missing reset ctrl\n");
   940	
   941		i2c_bus->global_regs =
   942			syscon_regmap_lookup_by_phandle(dev_of_node(dev), "aspeed,global-regs");
   943		if (IS_ERR(i2c_bus->global_regs))
   944			return PTR_ERR(i2c_bus->global_regs);
   945	
   946		regmap_read(i2c_bus->global_regs, AST2600_I2CG_CTRL, &global_ctrl);
   947		if ((global_ctrl & AST2600_GLOBAL_INIT) != AST2600_GLOBAL_INIT) {
   948			regmap_write(i2c_bus->global_regs, AST2600_I2CG_CTRL, AST2600_GLOBAL_INIT);
   949			regmap_write(i2c_bus->global_regs, AST2600_I2CG_CLK_DIV_CTRL, I2CCG_DIV_CTRL);
   950		}
   951	
   952		i2c_bus->dev = dev;
   953		i2c_bus->multi_master = device_property_read_bool(dev, "multi-master");
   954		i2c_bus->dma_available = device_property_read_bool(dev, "aspeed,enable-dma");
 > 955		if (i2c_bus->dma_abailable)
   956			i2c_bus->mode = DMA_MODE;
   957		else
   958			i2c_bus->mode = BUFF_MODE;
   959	
   960		if (i2c_bus->mode == BUFF_MODE) {
   961			i2c_bus->buf_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
   962			if (IS_ERR(i2c_bus->buf_base))
   963				i2c_bus->mode = BYTE_MODE;
   964			else
   965				i2c_bus->buf_size = resource_size(res) / 2;
   966		}
   967	
   968		ast2600_i2c_set_xfer_mode(i2c_bus, i2c_bus->mode);
   969	
   970		/*
   971		 * i2c timeout counter: use base clk4 1Mhz,
   972		 * per unit: 1/(1000/1024) = 1024us
   973		 */
   974		ret = device_property_read_u32(dev, "i2c-scl-clk-low-timeout-us", &i2c_bus->timeout);
   975		if (!ret)
   976			i2c_bus->timeout = DIV_ROUND_UP(i2c_bus->timeout, 1024);
   977	
   978		init_completion(&i2c_bus->cmd_complete);
   979	
   980		i2c_bus->irq = platform_get_irq(pdev, 0);
   981		if (i2c_bus->irq < 0)
   982			return i2c_bus->irq;
   983	
   984		platform_set_drvdata(pdev, i2c_bus);
   985	
   986		i2c_bus->clk = devm_clk_get(i2c_bus->dev, NULL);
   987		if (IS_ERR(i2c_bus->clk))
   988			return dev_err_probe(i2c_bus->dev, PTR_ERR(i2c_bus->clk), "Can't get clock\n");
   989	
   990		i2c_bus->apb_clk = clk_get_rate(i2c_bus->clk);
   991	
   992		i2c_parse_fw_timings(i2c_bus->dev, &i2c_bus->timing_info, true);
   993	
   994		/* Initialize the I2C adapter */
   995		i2c_bus->adap.owner = THIS_MODULE;
   996		i2c_bus->adap.algo = &i2c_ast2600_algorithm;
   997		i2c_bus->adap.retries = 0;
   998		i2c_bus->adap.dev.parent = i2c_bus->dev;
   999		device_set_node(&i2c_bus->adap.dev, dev_fwnode(dev));
  1000		i2c_bus->adap.algo_data = i2c_bus;
  1001		strscpy(i2c_bus->adap.name, pdev->name);
  1002		i2c_set_adapdata(&i2c_bus->adap, i2c_bus);
  1003	
  1004		ret = ast2600_i2c_init(i2c_bus);
  1005		if (ret < 0)
  1006			return dev_err_probe(dev, ret, "Unable to initial i2c %d\n", ret);
  1007	
  1008		ret = devm_request_irq(dev, i2c_bus->irq, ast2600_i2c_bus_irq, 0,
  1009				       dev_name(dev), i2c_bus);
  1010		if (ret < 0) {
  1011			ret = dev_err_probe(dev, ret, "Unable to request irq %d\n",
  1012					    i2c_bus->irq);
  1013			goto err;
  1014		}
  1015	
  1016		writel(AST2600_I2CM_PKT_DONE | AST2600_I2CM_BUS_RECOVER,
  1017		       i2c_bus->reg_base + AST2600_I2CM_IER);
  1018	
  1019		ret = devm_i2c_add_adapter(dev, &i2c_bus->adap);
  1020		if (ret)
  1021			goto err;
  1022	
  1023		ret = sysfs_create_file(&dev->kobj, &dev_attr_xfer_mode.attr);
  1024		if (ret)
  1025			goto err;
  1026	
  1027		return 0;
  1028	
  1029	err:
  1030		writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
  1031		writel(0, i2c_bus->reg_base + AST2600_I2CM_IER);
  1032		return ret;
  1033	}
  1034	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki