[PATCH u-boot v2] ARM: dts: aspeed: Add dts for ASUS Kommando IPMI card

Add dts for Asus Kommando IPMI card, an ast2600 based pcie bmc card.

This version of the DTS doesn't support networking due to u-boot inserting
mac delays (when it isn't really needed) and needing to misconfigure the
phy-mode in linux due to it. See discussion here [1] for more details.

Networking can be enabled in this manner currently.

aliases {
        eth0 = &mac2;
};

&mac2 {
	status = "okay";
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rgmii3_default>;
};

&mdio {
       status = "okay";
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_mdio3_default>;
       #address-cells = <1>;
       #size-cells = <0>;

       ethphy2: ethernet-phy@2 {
               reg = <0>;
       };
};

&scu {
       mac2-clk-delay = <0 0
                         0 0
                         0 0>;
};

Once u-boot is updated to not insert these clk delays, the scu node from
above can be dropped and networking should work in rgmii-id mode as
expected

[1] https://lore.kernel.org/linux-aspeed/[email protected]/

Signed-off-by: Anirudh Srinivasan <[email protected]>
---
Changes in v2:
- Drop ethernet node from DT
- Add info to commit message on why this was dropped (references to
  linux kernel discussion about aspeed MAC driver fixes) and how to
  re-enable it
- Link to v1: https://lore.kernel.org/r/[email protected]
---
 arch/arm/dts/Makefile                            |  1 +
 arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts | 71 ++++++++++++++++++++++++
 2 files changed, 72 insertions(+)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5141c3dc3aa025e2f5c9b2bb98216ee5c72cdf70..fa6837be747da4fbe102ac27e60ee3d81e230cb7 100755
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -682,6 +682,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2500-genesis3.dtb \
 	ast2500-romulus.dtb \
 	ast2600-ampere.dtb \
+	ast2600-asus-kommando-ipmi-card.dtb \
 	ast2600-bletchley.dtb \
 	ast2600-dcscm.dtb \
 	ast2600-evb-ecc.dtb \
diff --git a/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts b/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts
new file mode 100644
index 0000000000000000000000000000000000000000..52ee7484ea3019cecbcb6b521a2bc418a9122002
--- /dev/null
+++ b/arch/arm/dts/ast2600-asus-kommando-ipmi-card.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "ast2600-u-boot.dtsi"
+
+/ {
+	model = "ASUS Kommando IPMI Card";
+	compatible = "asus,kommando-ipmi-card", "aspeed,ast2600";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	aliases {
+		spi0 = &fmc;
+	};
+
+	cpus {
+		cpu@0 {
+			clock-frequency = <800000000>;
+		};
+		cpu@1 {
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fmcquad_default>;
+
+	flash@0 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&hace {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&sdrammc {
+	clock-frequency = <400000000>;
+};
+
+&uart5 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&wdt3 {
+	status = "okay";
+};

---
base-commit: d40130c7056b84dc5213f3ff6764d0e45bb84035
change-id: 20260228-asus-kommando-9de4d6b779a8

Best regards,
-- 
Anirudh Srinivasan <[email protected]>