Re: [PATCH v29 2/4] dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs properties
Conor Dooley <[email protected]>
| Newsgroups | org.ozlabs.lists.openbmc,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-i2c,org.kernel.vger.linux-kernel,org.ozlabs.lists.linux-aspeed |
|---|---|
| Message-ID | <20260415-unrushed-collected-562130070d8b@spud> |
On Wed, Apr 15, 2026 at 01:14:03PM +0800, Ryan Chen wrote: > Add the aspeed,global-regs phandle to reference the AST2600 global > registers syscon node, containing the SoC-common I2C register set. > > These properties apply only to the AST2600 binding. Legacy DTs remain > unchanged. > > Signed-off-by: Ryan Chen <[email protected]> I hate to do it to you on v29, but can you please explain what this "soc-common i2c register set" actually is/does in your commit message. The patch seems fine, so with that Acked-by: Conor Dooley <[email protected]> pw-bot: not-applicable > --- > Changes in v29: > - remove aspeed,enable-dma properties. > > Changes in v28: > - update commit message correspond with aspeed,enable-dma. > - remove aspeed,transfer-mode and add aspeed,enable-dma property and > description. > - Fix aspeed,enable-dma description to reflect hardware capability rather > than software behavior > > Changes in v27: > - change aspeed,transfer-mode to aspeed,enable-dma. > --- > Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml > index de2c359037da..0c769efb76a5 100644 > --- a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml > @@ -37,6 +37,12 @@ properties: > resets: > maxItems: 1 > > + aspeed,global-regs: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + Phandle reference to the i2c global syscon node, containing the > + SoC-common i2c register set. > + > required: > - reg > - compatible > @@ -59,4 +65,5 @@ examples: > resets = <&syscon ASPEED_RESET_I2C>; > clock-frequency = <100000>; > interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; > + aspeed,global-regs = <&i2c_global>; > }; > > -- > 2.34.1 >
signature.asc
(application/pgp-signature, 228 B)
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCad+scQAKCRB4tDGHoIJi 0kJHAQCCIue29Y53DEXwYeyc7bzKCGyQ41fURdeMFKTMRVm7uAD9FboLEsQkGSoy RW+T31SM4kdnSSbuJvWj/tlGvWC9xQ8= =8TWM -----END PGP SIGNATURE-----