[PATCH RESEND v3 2/4] phy: axiado: add Axiado eMMC PHY driver

From: SriNavmani A <[email protected]>

It provides the required configurations for Axiado eMMC PHY driver for
HS200 mode.

Signed-off-by: SriNavmani A <[email protected]>
Co-developed-by: Prasad Bolisetty <[email protected]>
Signed-off-by: Prasad Bolisetty <[email protected]>
Signed-off-by: Tzu-Hao Wei <[email protected]>
---
 drivers/phy/Kconfig                  |   1 +
 drivers/phy/Makefile                 |   1 +
 drivers/phy/axiado/Kconfig           |  11 ++
 drivers/phy/axiado/Makefile          |   1 +
 drivers/phy/axiado/phy-axiado-emmc.c | 217 +++++++++++++++++++++++++++++++++++
 5 files changed, 231 insertions(+)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 678dd0452f0aa0597773433f04d2a9ba77474d2a..b802274ea45a84bd36d7c0b7fb90e368a5c018b4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -103,6 +103,7 @@ config PHY_NXP_PTN3222
 
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
+source "drivers/phy/axiado/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index bfb27fb5a494283d7fd05dd670ebd1b12df8b1a1..f1b9e4a8673bcde3fdc0fdc06a3deddb5785ced1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
 obj-y					+= allwinner/	\
 					   amlogic/	\
+					   axiado/	\
 					   broadcom/	\
 					   cadence/	\
 					   freescale/	\
diff --git a/drivers/phy/axiado/Kconfig b/drivers/phy/axiado/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..d159e0345345987c7f48dcd12d3237997735d2b5
--- /dev/null
+++ b/drivers/phy/axiado/Kconfig
@@ -0,0 +1,11 @@
+#
+# PHY drivers for Axiado platforms
+#
+
+config PHY_AX3000_EMMC
+	tristate "Axiado eMMC PHY driver"
+	depends on OF && (ARCH_AXIADO || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enables this to support for the AX3000 EMMC PHY driver.
+	  If unsure, say N.
diff --git a/drivers/phy/axiado/Makefile b/drivers/phy/axiado/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..1e2b1ba016092eaffdbd7acbd9cdc8577d79b35c
--- /dev/null
+++ b/drivers/phy/axiado/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PHY_AX3000_EMMC)		+= phy-axiado-emmc.o
diff --git a/drivers/phy/axiado/phy-axiado-emmc.c b/drivers/phy/axiado/phy-axiado-emmc.c
new file mode 100644
index 0000000000000000000000000000000000000000..e0e2174776ad027df0a10a8c4741b1b4ef9ef40e
--- /dev/null
+++ b/drivers/phy/axiado/phy-axiado-emmc.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Axiado eMMC PHY driver
+ *
+ * Copyright (C) 2017 Arasan Chip Systems Inc.
+ * Copyright (C) 2022-2026 Axiado Corporation (or its affiliates).
+ *
+ * Based on Arasan Driver (sdhci-pci-arasan.c)
+ * sdhci-pci-arasan.c - Driver for Arasan PCI Controller with integrated phy.
+ */
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* Arasan eMMC 5.1 - PHY configuration registers */
+#define CAP_REG_IN_S1_MSB		0x04
+#define PHY_CTRL_1			0x38
+#define PHY_CTRL_2			0x3c
+#define PHY_CTRL_3			0x40
+#define STATUS				0x50
+
+#define DLL_ENBL	BIT(26)
+#define RTRIM_EN	BIT(21)
+#define PDB_ENBL	BIT(23)
+#define RETB_ENBL	BIT(1)
+
+#define REN_STRB	BIT(27)
+#define REN_CMD_EN	GENMASK(20, 12)
+
+/* Pull-UP Enable on CMD Line */
+#define PU_CMD_EN	GENMASK(11, 3)
+
+/* Selection value for the optimum delay from 1-32 output tap lines */
+#define OTAP_DLY	0x02
+/* DLL charge pump current trim default [1000] */
+#define DLL_TRM_ICP	0x08
+/* Select the frequency range of DLL Operation */
+#define FRQ_SEL	0x01
+
+#define OTAP_SEL_MASK		GENMASK(10, 7)
+#define DLL_TRM_MASK		GENMASK(25, 22)
+#define DLL_FRQSEL_MASK		GENMASK(27, 25)
+
+#define OTAP_SEL(x)		(FIELD_PREP(OTAP_SEL_MASK, x) | OTAPDLY_EN)
+#define DLL_TRM(x)		(FIELD_PREP(DLL_TRM_MASK, x) | DLL_ENBL)
+#define DLL_FRQSEL(x)	FIELD_PREP(DLL_FRQSEL_MASK, x)
+
+#define OTAPDLY_EN	BIT(11)
+
+#define SEL_DLY_RXCLK	BIT(18)
+#define SEL_DLY_TXCLK	BIT(19)
+
+#define CALDONE_MASK	0x40
+#define DLL_RDY_MASK	0x1
+#define MAX_CLK_BUF0	BIT(20)
+#define MAX_CLK_BUF1	BIT(21)
+#define MAX_CLK_BUF2	BIT(22)
+
+#define CLK_MULTIPLIER	0xc008e
+#define POLL_TIMEOUT_MS	3000
+#define POLL_DELAY_US	100
+
+struct axiado_emmc_phy {
+	void __iomem *reg_base;
+	struct device *dev;
+};
+
+static int axiado_emmc_phy_init(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	struct device *dev = ax_phy->dev;
+	u32 val;
+	int ret;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | RETB_ENBL | RTRIM_EN, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | PDB_ENBL, ax_phy->reg_base + PHY_CTRL_3);
+
+	ret = readl_poll_timeout(ax_phy->reg_base + STATUS, val,
+				 val & CALDONE_MASK, POLL_DELAY_US,
+				 POLL_TIMEOUT_MS * 1000);
+	if (ret) {
+		dev_err(dev, "PHY calibration timeout\n");
+		return ret;
+	}
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | REN_CMD_EN | PU_CMD_EN, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_2);
+	writel(val | REN_STRB, ax_phy->reg_base + PHY_CTRL_2);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | MAX_CLK_BUF0 | MAX_CLK_BUF1 | MAX_CLK_BUF2,
+	       ax_phy->reg_base + PHY_CTRL_3);
+
+	writel(CLK_MULTIPLIER, ax_phy->reg_base + CAP_REG_IN_S1_MSB);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | SEL_DLY_RXCLK | SEL_DLY_TXCLK,
+	       ax_phy->reg_base + PHY_CTRL_3);
+
+	return 0;
+}
+
+static int axiado_emmc_phy_power_on(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	struct device *dev = ax_phy->dev;
+	u32 val;
+	int ret;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | RETB_ENBL, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | PDB_ENBL, ax_phy->reg_base + PHY_CTRL_3);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_2);
+	writel(val | OTAP_SEL(OTAP_DLY), ax_phy->reg_base + PHY_CTRL_2);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | DLL_TRM(DLL_TRM_ICP), ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | DLL_FRQSEL(FRQ_SEL), ax_phy->reg_base + PHY_CTRL_3);
+
+	ret = read_poll_timeout(readl, val, val & DLL_RDY_MASK, POLL_DELAY_US,
+				POLL_TIMEOUT_MS * 1000, false,
+				ax_phy->reg_base + STATUS);
+	if (ret) {
+		dev_err(dev, "DLL ready timeout\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int axiado_emmc_phy_power_off(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	val &= ~(DLL_TRM_MASK | DLL_ENBL);
+	writel(val, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	val &= ~(DLL_FRQSEL_MASK | PDB_ENBL);
+	writel(val, ax_phy->reg_base + PHY_CTRL_3);
+
+	return 0;
+}
+
+static const struct phy_ops axiado_emmc_phy_ops = {
+	.init = axiado_emmc_phy_init,
+	.power_on = axiado_emmc_phy_power_on,
+	.power_off = axiado_emmc_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id axiado_emmc_phy_of_match[] = {
+	{ .compatible = "axiado,ax3000-emmc-phy" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, axiado_emmc_phy_of_match);
+
+static int axiado_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct axiado_emmc_phy *ax_phy;
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	ax_phy = devm_kzalloc(dev, sizeof(*ax_phy), GFP_KERNEL);
+	if (!ax_phy)
+		return -ENOMEM;
+
+	ax_phy->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ax_phy->reg_base))
+		return PTR_ERR(ax_phy->reg_base);
+
+	ax_phy->dev = dev;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &axiado_emmc_phy_ops);
+	if (IS_ERR(generic_phy))
+		return dev_err_probe(dev, PTR_ERR(generic_phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(generic_phy, ax_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver axiado_emmc_phy_driver = {
+	.probe = axiado_emmc_phy_probe,
+	.driver = {
+		.name = "axiado-emmc-phy",
+		.of_match_table = axiado_emmc_phy_of_match,
+	},
+};
+module_platform_driver(axiado_emmc_phy_driver);
+
+MODULE_DESCRIPTION("AX3000 eMMC PHY Driver");
+MODULE_AUTHOR("Axiado Corporation");
+MODULE_LICENSE("GPL");

-- 
2.34.1