Re: [PATCH v8 1/3] dt-bindings: pinctrl: Add aspeed,ast2700-soc0-pinctrl

On Tue, Apr 28, 2026 at 05:49:45PM +0800, Billy Tsai wrote:
> Add a device tree binding for the pin controller found in the
> ASPEED AST2700 SoC0.
> 
> The controller manages various peripheral functions such as eMMC, USB,
> VGA DDC, JTAG, and PCIe root complex signals.
> 
> Describe the AST2700 SoC0 pin controller using standard pin multiplexing
> and configuration properties.
> 
> Signed-off-by: Billy Tsai <[email protected]>
> ---
>  .../pinctrl/aspeed,ast2700-soc0-pinctrl.yaml       | 187 +++++++++++++++++++++
>  1 file changed, 187 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml
> new file mode 100644
> index 000000000000..ef500209d81e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml
> @@ -0,0 +1,187 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2700-soc0-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED AST2700 SoC0 Pin Controller
> +
> +maintainers:
> +  - Billy Tsai <[email protected]>
> +
> +description:

Need '>' if you have paragraphs.

> +  The AST2700 features a dual-SoC architecture with two interconnected SoCs,
> +  each having its own System Control Unit (SCU) for independent pin control.
> +  This pin controller manages the pin multiplexing for SoC0.
> +
> +  The SoC0 pin controller manages pin functions including eMMC, VGA DDC,
> +  dual USB3/USB2 ports (A and B), JTAG, and PCIe root complex interfaces.
> +
> +properties:
> +  compatible:
> +    const: aspeed,ast2700-soc0-pinctrl

blank line

> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  '-state$':
> +    description: |
> +      Pin control state.
> +
> +      If `function` is present, the node describes a pinmux state and must

Use regular quotes.

> +      specify `groups`.
> +
> +      For pin configuration, exactly one of `groups` or `pins` must be
> +      specified in each state node. Group-level configuration applies to all
> +      pins in the group. Pin-level configuration may be supplied in a
> +      separate state node for individual pins; when both group-level and
> +      pin-level configuration apply to the same pin, the pin-level
> +      configuration takes precedence.
> +
> +    type: object
> +    allOf:
> +      - $ref: pinmux-node.yaml#
> +      - $ref: pincfg-node.yaml#
> +      - if:
> +          required:
> +            - function
> +        then:
> +          required:
> +            - groups
> +      - oneOf:
> +          - required:
> +              - groups
> +          - required:
> +              - pins
> +
> +    additionalProperties: false
> +
> +    properties:
> +      function:
> +        enum:
> +          - EMMC
> +          - JTAGDDR
> +          - JTAGM0
> +          - JTAGPCIEA
> +          - JTAGPCIEB
> +          - JTAGPSP
> +          - JTAGSSP
> +          - JTAGTSP
> +          - JTAGUSB3A
> +          - JTAGUSB3B
> +          - PCIERC0PERST
> +          - PCIERC1PERST
> +          - TSPRSTN
> +          - UFSCLKI
> +          - USB2AD0
> +          - USB2AD1
> +          - USB2AH
> +          - USB2AHP
> +          - USB2AHPD0
> +          - USB2AXH
> +          - USB2AXH2B
> +          - USB2AXHD1
> +          - USB2AXHP
> +          - USB2AXHP2B
> +          - USB2AXHPD1
> +          - USB2BD0
> +          - USB2BD1
> +          - USB2BH
> +          - USB2BHP
> +          - USB2BHPD0
> +          - USB2BXH
> +          - USB2BXH2A
> +          - USB2BXHD1
> +          - USB2BXHP
> +          - USB2BXHP2A
> +          - USB2BXHPD1
> +          - USB3AXH
> +          - USB3AXH2B
> +          - USB3AXHD
> +          - USB3AXHP
> +          - USB3AXHP2B
> +          - USB3AXHPD
> +          - USB3BXH
> +          - USB3BXH2A
> +          - USB3BXHD
> +          - USB3BXHP
> +          - USB3BXHP2A
> +          - USB3BXHPD
> +          - VB
> +          - VGADDC
> +
> +      groups:
> +        enum:
> +          - EMMCCDN
> +          - EMMCG1
> +          - EMMCG4
> +          - EMMCG8
> +          - EMMCWPN
> +          - JTAG0
> +          - PCIERC0PERST
> +          - PCIERC1PERST
> +          - TSPRSTN
> +          - UFSCLKI
> +          - USB2A
> +          - USB2AAP
> +          - USB2ABP
> +          - USB2ADAP
> +          - USB2AH
> +          - USB2AHAP
> +          - USB2B
> +          - USB2BAP
> +          - USB2BBP
> +          - USB2BDBP
> +          - USB2BH
> +          - USB2BHBP
> +          - USB3A
> +          - USB3AAP
> +          - USB3ABP
> +          - USB3B
> +          - USB3BAP
> +          - USB3BBP
> +          - VB0
> +          - VB1
> +          - VGADDC
> +
> +      pins:
> +        enum:
> +          - AB13
> +          - AB14
> +          - AC13
> +          - AC14
> +          - AD13
> +          - AD14
> +          - AE13
> +          - AE14
> +          - AE15
> +          - AF13
> +          - AF14
> +          - AF15
> +
> +      drive-strength:
> +        enum: [3, 6, 8, 11, 16, 18, 20, 23, 30, 32, 33, 35, 37, 38, 39, 41]
> +
> +      bias-disable: true
> +      bias-pull-up: true
> +      bias-pull-down: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pinctrl@400 {
> +        compatible = "aspeed,ast2700-soc0-pinctrl";
> +        reg = <0x400 0x318>;
> +        emmc-state {
> +            function = "EMMC";
> +            groups = "EMMCG1";
> +        };
> +    };
> 
> -- 
> 2.34.1
>