Re: [PATCH 1/5] arm64: dts: freescale: Import optee node from u-boot device trees

"Mathieu Dubois-Briand" <[email protected]> Mon, 13 Jul 2026 09:42:05 +0200

Newsgroups	org.ozlabs.lists.openbmc,dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID	<[email protected]>

On Fri Jul 10, 2026 at 11:09 PM CEST, Frank Li wrote:
> On Fri, Jul 10, 2026 at 05:31:34PM +0200, Mathieu Dubois-Briand wrote:
>> [You don't often get email from [email protected]. Learn=
 why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> U-Boot is importing kernel device trees for these platforms, but adding
>> a firmware node to enable communication with OP-TEE. Importing
>> changes here will allow to remove these additions in U-Boot.
>>
>> Signed-off-by: Mathieu Dubois-Briand <[email protected]>
>> ---
>>  arch/arm64/boot/dts/freescale/imx8mm.dtsi                | 7 +++++++
>>  arch/arm64/boot/dts/freescale/imx8mn.dtsi                | 7 +++++++
>>  arch/arm64/boot/dts/freescale/imx8mp.dtsi                | 7 +++++++
>
> Please split soc dts change to new patch.
>
> Frank
>

Sure, I will split the changes.

Thanks,
Mathieu

--=20
Mathieu Dubois-Briand, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com