[PATCH 7/8] ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards

Declare jedec,spi-nor flash nodes on the AST2600 EVB, Qualcomm
DC-SCM, Quanta S6Q, and UfiSpace NCPlite boards with the properties
previously inherited from aspeed-g6.dtsi stubs. Keep status = "okay"
so these boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <[email protected]>
---
 arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts          | 4 ++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts   | 9 +++++++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts       | 6 ++++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts | 6 ++++++
 4 files changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index 3f2ca9da0be2..38f8d7c03d16 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -179,6 +179,8 @@ &rtc {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -194,6 +196,8 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
index 259ef3f54c5c..882b68248e14 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -61,18 +61,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
@@ -83,10 +89,13 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bios";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index 86451227847b..70791b3c0989 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -196,10 +196,13 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
@@ -211,10 +214,13 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "spi2:0";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
index 7ab29129d1e4..d8f7939abf8b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -148,18 +148,24 @@ &mac2 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
-- 
2.43.0