Re: PKCS#11 TA needs userland supplicant?

Jan Kiszka via OP-TEE <[email protected]> Fri, 10 Apr 2026 07:45:19 +0200
Newsgroups org.trustedfirmware.lists.op-tee
Message-ID <[email protected]>
On 10.04.26 07:37, Jens Wiklander wrote:
> Hi,
> 
> On Thu, Apr 9, 2026 at 7:41 PM Jan Kiszka via OP-TEE
> <[email protected]> wrote:
>>
>> Hi all,
>>
>> to avoid that I'm debugging further this error I get during boot with
>> CONFIG_RPMB=y in the kernel and CFG_IN_TREE_EARLY_TAS=pkcs11/fd02c9da...:
>>
>> [    0.359372] mmcblk0boot0: mmc0:0001 QEMU!! 4.00 MiB
>> [    0.361779] mmcblk0boot1: mmc0:0001 QEMU!! 4.00 MiB
>> [    0.363761] mmcblk0rpmb: mmc0:0001 QEMU!! 2.00 MiB, chardev (248:0)
>> D/TC:? 0 tee_ta_init_session_with_context:569 Re-open trusted service 7011a688-ddde-4053-a5a9-7b3c4ddf13b8
>> D/TC:? 0 legacy_rpmb_init:1143 Trying legacy RPMB init
> 
> The in-kernel routing didn't initialize as expected, so OP-TEE is
> falling back to the tee-supplicant based RPMB communication.
> 
> 
>> E/TC:? 0 get_rpc_alloc_res:646 RPC allocation failed. Non-secure world result: ret=0xffff000c ret_origin=0x2
>> D/TC:? 0 tee_ta_invoke_command:830 Error: f0100003 of 4
>> D/TC:? 0 tee_ta_close_session:469 csess 0xc0210910 id 1
>> D/TC:? 0 tee_ta_close_session:488 Destroy session
>>
>> Is it possible at all to run the PKCS#11 TA without userland tee-
>> supplicant? I thought it only needs the supplicant for RPMB, thus should
>> be fine with the in-kernel routing (which is active), but maybe that is
>> not true.
> 
> Yes, I think so. I haven't tried it myself, though. Anyway, the log
> tells that OP-TEE isn't using in-kernel routing. You can also check
> /sys/class/tee/teepriv0/rpmb_routing_model to see what the driver has
> negotiated.
> 

# cat /sys/class/tee/teepriv0/rpmb_routing_model
kernel

And if I build optee as module and load it later, then call "pkcs1-tool
--module /usr/lib/libckteec.so.0 -I", it also waits for userspace tee here:

...
F/TC:? 0 trace_syscall:147 syscall #8 (syscall_check_access_rights)
F/TC:? 0 trace_syscall:147 syscall #41 (syscall_storage_obj_open)
D/TC:? 0 legacy_rpmb_init:1143 Trying legacy RPMB init
I/TC: thread_rpc_alloc 0, arg->ret ffff0000
I/TC: get_rpc_alloc_res: bt 0 size 8192

Jan

-- 
Siemens AG, Foundational Technologies
Linux Expert Center